When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Twin front mount s366s
Cxracing c6 turbo headers
Hood exit exhaust
Holley Hiram intake
Griffin radiator
Keeping ac possible custom lines
Abs relocated to the fender
15 gallon fuel cell
Twin dw350il pumps for now
-10 feed split to -8 at the backs of both rails
-8 from the front of both rails to the fpr
-8 return
Stage 2
Engine mounted Reid power glide
Custom mounts
Custom drive shaft
Narrowed ford 8.8 solid axle
Custom ladder bar suspension
Custom mini tub
Plan is the run mt 315 pros (29.9" tall)
subscribed :O i reallly want to see how you do the transmission to the rear end and im glad the cxracing headers fit pretty good from the looks of it i was contemplating their single setup hot side
The cxracing headers are definitely worth the price, but they are not high end by any means. I'll eventually make my own headers, I just wanted as little down time as possible right now.
If Im not going spearfishing all weekend, I should have the frame rails boxed off and the bumper beam bent and welded on. And hopefully a permanent mount for the turbos. My radiator finally came so I have a better idea of where everything will be.
If Im not going spearfishing all weekend, I should have the frame rails boxed off and the bumper beam bent and welded on. And hopefully a permanent mount for the turbos. My radiator finally came so I have a better idea of where everything will be.
What radiator you got? Share the knowledge 👌🏻 post pics lol
Looks like it's gonna be a nice build. Just curious because I have also been looking at these headers and was wondering if you are going to have air conditioning and where if you are what it's going to take to mount the condensing coil.
Looks like it's gonna be a nice build. Just curious because I have also been looking at these headers and was wondering if you are going to have air conditioning and where if you are what it's going to take to mount the condensing coil.
Yes, still keeping Ac, my setup is very far from traditional on how everything is being placed. I'll be sure to update pics as the build goes on so you can see how it's mounted
04-26-2016, 07:33 PM
Dudeman v2.0
