Edelbrock E Force made 750/790, ATI damper, Snow methanol, MSD pump Booster, etc
#1
Advanced
Thread Starter
Member Since: Aug 2009
Location: Rock Hill, SC
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Edelbrock E Force made 750/790, ATI damper, Snow methanol, MSD pump Booster, etc
Selling everything here as a package deal and package deal only. Will ship, and local pickup is welcome. I could also probably meet in person within a reasonable distance.
This setup made 750hp/790tq on a 2012 Corvette Grand Sport LS3/A6 with Trick Flow heads and a small cam. Stock bottom end. This was at 14lbs of boost with the large crank pulley and small blower pulley. The car was transformed back to stock because the owner is wanting a C7. No issues with anything, and never hurt. It is all ready to run.
-Edelbrock E Force intercooled supercharger kit
-All belts, hoses, fuel lines, fuel rails, map sensor, etc
-Supercharger radiator and hoses
-Three different size blower pulleys
-ATI super damper with two different size pulleys
-MSD programmable fuel pump voltage controller
-Snow programmable methanol injection kit
-Fuel injectors
-Casper's Electronics manual fan switch
-Some misc wiring and plumbing not pictured is included. Some had to be cut to be removed from the car, but when you lay it out it's easy to see where things go. We made cuts, like disconnections, not butchered anything up.
The only items you will need to install on your car are a valley cover and crank pinning kit.
Still have the paperwork for most of it, and it will be included. This stuff new was close to 10k. Asking $5,500
This setup made 750hp/790tq on a 2012 Corvette Grand Sport LS3/A6 with Trick Flow heads and a small cam. Stock bottom end. This was at 14lbs of boost with the large crank pulley and small blower pulley. The car was transformed back to stock because the owner is wanting a C7. No issues with anything, and never hurt. It is all ready to run.
-Edelbrock E Force intercooled supercharger kit
-All belts, hoses, fuel lines, fuel rails, map sensor, etc
-Supercharger radiator and hoses
-Three different size blower pulleys
-ATI super damper with two different size pulleys
-MSD programmable fuel pump voltage controller
-Snow programmable methanol injection kit
-Fuel injectors
-Casper's Electronics manual fan switch
-Some misc wiring and plumbing not pictured is included. Some had to be cut to be removed from the car, but when you lay it out it's easy to see where things go. We made cuts, like disconnections, not butchered anything up.
The only items you will need to install on your car are a valley cover and crank pinning kit.
Still have the paperwork for most of it, and it will be included. This stuff new was close to 10k. Asking $5,500
Last edited by FERGYMOTO; 08-09-2016 at 11:11 AM.
The following users liked this post:
yellowmnm (10-08-2016)
#3
Advanced
Thread Starter
Member Since: Aug 2009
Location: Rock Hill, SC
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
The aluminum valley cover. I do have the Edelbrock fuel rail covers. They were never used. I can order a crank pin kit and valley cover for the buyer if they want me to handle it.
#13
Emerging Vendor
i have the same super charger.."not for sale"...i had to use a different valley cover...what a ride!...great price!!!
Last edited by Smokeyjr; 09-16-2016 at 09:19 AM.
#17
Advanced
Thread Starter
Member Since: Aug 2009
Location: Rock Hill, SC
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
I don't know the answer to that for sure. The car it was on still only has 12k miles on it today. Everything is in great condition.
Last edited by FERGYMOTO; 10-07-2016 at 11:06 PM.
#18
Heel & Toe