OEM C6 Z06 Wheels on c5, Video Tutorial. :-)
#1
Instructor
Thread Starter
OEM C6 Z06 Wheels on c5, Video Tutorial. :-)
Heres a little video I made for anybody who is curious about running oem c6 z06 wheels, and I show you how I use them without any issues. Hope this will clear up many questions asked about using c6 z06 wheels.
Link Below:
Link Below:
#2
1/4 mile/AutoX
Would love to have 325's on the rear
#3
Burning Brakes
Looks great. I can't believe the rears don't stick out badly at all. And with a 325 tire in the back. I'm gonna look into getting the same wheels and tires also.
#4
He clipped the top of the picture that would have shown the fender and location of the tire. It would be nice to see another shot of the rear showing the top of the fender.
#6
Burning Brakes
#8
Instructor
Car looks great...
I did the same thing but w/o the spacers and running 325's on 19X12's. Haven't babied the car but don't run it especially hard either and cannot detect any rubbing on the inside.
Having TPMS's installed tomorrow as the wheels came w/o them.
This is what my 'Vert looks like...rears extend ~1 1/4" out of the fender and not sure if I like the look. Priced it at nearly $7,000 to acquire, install, and body work the new flared fenders...I may just keep it this way as I really like the fat rears!
Any opinions?
Having TPMS's installed tomorrow as the wheels came w/o them.
This is what my 'Vert looks like...rears extend ~1 1/4" out of the fender and not sure if I like the look. Priced it at nearly $7,000 to acquire, install, and body work the new flared fenders...I may just keep it this way as I really like the fat rears!
Any opinions?
#9
Melting Slicks
Member Since: Jul 2004
Location: orlando florida
Posts: 3,092
Received 114 Likes
on
98 Posts
St. Jude Donor '15
i started a nice thread about having 12" wide wheels with stock fenders.
https://www.corvetteforum.com/forums...only-pics.html
also posted this when i installed the c6 z06 wheels
https://www.corvetteforum.com/forums...with-pics.html
https://www.corvetteforum.com/forums...only-pics.html
also posted this when i installed the c6 z06 wheels
https://www.corvetteforum.com/forums...with-pics.html
Last edited by mrr23; 08-23-2016 at 05:32 PM.
#10
Racer
Heres a little video I made for anybody who is curious about running oem c6 z06 wheels, and I show you how I use them without any issues. Hope this will clear up many questions asked about using c6 z06 wheels.
Link Below:
https://www.youtube.com/watch?v=CKP34T9j05c
Link Below:
https://www.youtube.com/watch?v=CKP34T9j05c
Last edited by RomanNYC; 08-23-2016 at 08:07 PM.
#12
Melting Slicks
Member Since: Jul 2004
Location: orlando florida
Posts: 3,092
Received 114 Likes
on
98 Posts
St. Jude Donor '15
The following users liked this post:
RomanNYC (08-24-2016)
#14
Racer
I do have a small walk around video with the wheels on, link below. I'll try and get a better video for yall soon.
https://www.youtube.com/watch?v=WWATlFISkrY
https://www.youtube.com/watch?v=WWATlFISkrY
#15
Racer
I do have a small walk around video with the wheels on, link below. I'll try and get a better video for yall soon.
https://www.youtube.com/watch?v=WWATlFISkrY
https://www.youtube.com/watch?v=WWATlFISkrY
#16
Instructor
I have OEM GrandSports on my 98' with a 01-04 Z06 Alignment. No spacers, Hankook V12 325/30r19 in the rear and I have no scrubbing what so ever.
Lowered all the way on stock bolts w/ Z06 leaf springs/C6 Z06 Anti-roll bars/C6 Z06 Shocks.
I've even tracked my car at VIR and the drag strip with no issues. Must be a Z06 thing to need spacers?
I would have trimmed the brake duct instead of removing it to keep the brake cooling as efficient as possible.
Lowered all the way on stock bolts w/ Z06 leaf springs/C6 Z06 Anti-roll bars/C6 Z06 Shocks.
I've even tracked my car at VIR and the drag strip with no issues. Must be a Z06 thing to need spacers?
I would have trimmed the brake duct instead of removing it to keep the brake cooling as efficient as possible.
Last edited by Bryan144; 08-27-2016 at 09:01 PM.