When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
They probably stopped making them 15 years ago. And with good reason. If you run over a fly on the road with that thing, its going to get ripped right off the car. I saw that car there too and thought it looked like a Pep Boys accessory part.
Looks like 30 lbs. of ballast that is 1 speed bump or pot hole from needing a ne set of front panels. It reminds me of a wing I had ages ago on a 87 Fiero GT cute little underpowered car. I took it out in the rain and at 70 there were water drops dripping off the underside of the 'wing/ballast'.
Thanks for all of the useless information everybody.
Congratulation on your high post numbers.
Originally Posted by winstonc
It sounds as though YOU may be the one who needs to be a little tougher and thick skinned. This is a free forum that invites ALL replies to any posts put up here. If you can't take any other views other than your own on subjects you post here without or making childish responses, as you obviously have here, this might not be a good forum for you to be a part of. Not everyone here will view things as you do. You just need to deal with it and not get so emotional or butt hurt.
Last edited by FOURSPEEDVETTE; 08-29-2016 at 12:40 PM.
It sounds as though YOU may be the one who needs to be a little tougher and thick skinned. This is a free forum that invites ALL replies to any posts put up here. If you can't take any other views other than your own on subjects you post here without or making childish responses, as you obviously have here, this might not be a good forum for you to be a part of. Not everyone here will view things as you do. You just need to deal with it and not get so emotional or butt hurt.
More useless information!
First of, I didn't ask for an opinion of the spoiler. I ask if anyone knew who made it. I can't believe I'm actually trying to communicate with someone that can't read!
Sounds like you should get a life and not center it around a forum.
You're probably are too stupid, remember tough skin, to notice that someone liked my comment about useless information. The majority of the forum users feel the same.
Eat your hot pocket and ask your mom, she'll explain it to you, remember thick skin.
People are laughing at you.
If you have something else to say. IM me and I'll tell you how i really feel.
First of, I didn't ask for an opinion of the spoiler. I ask if anyone knew who made it. I can't believe I'm actually trying to communicate with someone that can't read!
Sounds like you should get a life and not center it around a forum.
You're probably are too stupid, remember tough skin, to notice that someone liked my comment about useless information. The majority of the forum users feel the same.
Eat your hot pocket and ask your mom, she'll explain it to you, remember thick skin.
People are laughing at you.
If you have something else to say. IM me and I'll tell you how i really feel.
Uh Oh a binky alert... If you go to any forum anywhere and offer a pic and expect no opinions you are kidding yourself and no one else's fault. You got your answer and someone else did your homework that you could have done yourself. Yet you hate the delivery of your homework. As SGT. Gunny would say 'grow a set' you got what you wanted for free. Easiest way to get ignored is to trash people to be a waste of your valuable time doing things to solve your problem.
Made by ACIVETTE (dot com). If you look at their website, you'll see this and the "phase II" front air dam. Both are similar.
The one in the OP actually looks like ABS. I agree it looks overblown w/o something to offset it "visually". It's though to consider much beyond the stock dam due to issues of clearance/breakage. I used to have the M1 spoiler...which I thought was perfect, but they don't make it anymore. I've been w/o one over a year (since the overpriced debacle we saw here last year).
Counter point...I wonder how that one in the OP lasted for 15 years! He must not drive it much! Or...it's not as bad as reviewed here.
2020 Corvette of the Year Finalist (appearance mods)
C4 of Year Winner (appearance mods) 2019
Originally Posted by winstonc
That's kinda funny!
The correct reply should have been: Look! It's Donald Trump's online campaign manager!!!
BTW...To the OP: Corvette guys REALLY don't like "dressing up" a Corvette much. It is what it is. If you try to fight that battle, you WILL end up looking like the guy in your cartoon.
First of, I didn't ask for an opinion of the spoiler. I ask if anyone knew who made it. I can't believe I'm actually trying to communicate with someone that can't read!
Sounds like you should get a life and not center it around a forum.
You're probably are too stupid, remember tough skin, to notice that someone liked my comment about useless information. The majority of the forum users feel the same.
Eat your hot pocket and ask your mom, she'll explain it to you, remember thick skin.
People are laughing at you.
If you have something else to say. IM me and I'll tell you how i really feel.
Buddy, you really need some serious help. Keep these ridiculous and childish comments coming and you'll be sure to get this post locked and maybe yourself banned from this forum. USMC? Hard to believe. The only Marines I know are extremely intellegent and are definitely "Tough Skinned". Maybe you missed that part.
Last edited by FOURSPEEDVETTE; 08-29-2016 at 04:48 PM.
Made by ACIVETTE (dot com). If you look at their website, you'll see this and the "phase II" front air dam. Both are similar.
The one in the OP actually looks like ABS. I agree it looks overblown w/o something to offset it "visually". It's though to consider much beyond the stock dam due to issues of clearance/breakage. I used to have the M1 spoiler...which I thought was perfect, but they don't make it anymore. I've been w/o one over a year (since the overpriced debacle we saw here last year).
Counter point...I wonder how that one in the OP lasted for 15 years! He must not drive it much! Or...it's not as bad as reviewed here.
Thanks I'll check it out.
I thought the same thing, how'd he drove it for 15 years and it still looks new.
Buddy, you really need some serious help. Keep these ridiculous and childish comments coming and you'll be sure to get this post locked and maybe yourself banned from this forum. USMC? Hard to believe. The only Marines I know are extremely intellegent and are definitely "Tough Skinned". Maybe you missed that part.
I haven't' done anything wrong to get ban. I'll get locked out of a thread that I started and you can just stop posting. THIS IS MY THREAD!
You posted a and I responded. You started it and now you're getting your feeling hurt.
I appreciated if you'd take this off line and stay out of any post that I start. But you're so emotions you can't. You have to have the last word.
BTW, people that get ban just login with a new email address. DUH!
Can an administrator please ask this guy to stop posting in my thread. Thank you.
What is childish are the assumptions that people made and then knocked it based on those assumptions. Perhaps you should just go on about your life and NOT make any comments. He is not interested in using it for street use. Besides, its really poor taste to knock something when someone asked about it. Just because YOU don't like it there's no need to poo poo someone else's idea or question. Idiot comments like that are what is ridiculous on this forum.
08-27-2016, 05:54 PM
Who makes this front spoiler?
This is a free forum that invites ALL replies to any posts put up here. If you can't take any other views other than your own on subjects you post here without 
Keep these ridiculous and childish comments coming and you'll be sure to get this post locked and maybe yourself banned from this forum. USMC? Hard to believe. The only Marines I know are extremely intellegent and are definitely "Tough Skinned". Maybe you missed that part.
