-LG Motorsports C7 Carbon Hood- Now Taking Deposits
#1
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
-LG Motorsports C7 Carbon Hood- Now Taking Deposits
We are now accepting deposits on the newest LG Motorsports Carbon hood, this time for the C7.
Details:
- What it fits: Any C7; base, GS, or Z06
- Carbonfiber construction
- increased louver area
- re-designed leading edge for increased downforce and cooling
- Excellent upgrade for any track car!
Deposit Details:
- 50% down required to hold your order and price
We are expecting currently a MSRP of $2995.95 (based off our current bolt on carbon hood). Those that have a deposit pre-order in place before the first hoods arrive will pay this and no more (shipping not included). If we are able to do them for less, it will be credited to your account before the hood ships to you. This way if they do turn out to be more, pre-orders are locked in at the lower rate with only a deposit.
These are going to be fully done in carbon fiber and will be 100% bolt on using all stock hinge points and latch hardware from your OEM hood.
#2
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
Currently we are planning to do 10 hoods on this first run and will be taking Pre-orders on those. I will have to ask about taking pre-orders over 10 hoods.
#3
Former Vendor
Thread Starter
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
Excellent question.
The hoods are going to be finished like our C6 louvered hood in exposed carbon so you can mask off what you want to keep carbon, paint the rest then clear. Or you can keep it completely bare, or paint all of it.
The hood above is a prototype and was not pretty enough to leave un-painted.
The hoods are going to be finished like our C6 louvered hood in exposed carbon so you can mask off what you want to keep carbon, paint the rest then clear. Or you can keep it completely bare, or paint all of it.
The hood above is a prototype and was not pretty enough to leave un-painted.
The following users liked this post:
Anthony @ LGMotorsports (09-28-2016)