1966 corvette parts wanted
10-07-2016, 09:34 PM
#1
Intermediate
Thread Starter
1966 corvette parts wanted
Update: Reassembly will start soon. Hope to find these and any other parts that could be out there. Maybe some garage clean outs will come up with some no longer needed parts.
Ongoing 66 427/425 Corvette Roadster restoration.
1)Looking for a set of NOS side exhaust covers and/or moldings.
2)Early original TI amp box with cupped base.
3)Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
4)Original restored inside and outside windshield stainless trim.
5)original set of 66 roadster door panels.
6)original driveshaft
7)original tire tub and or lid
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.
Ongoing 66 427/425 Corvette Roadster restoration.
1)Looking for a set of NOS side exhaust covers and/or moldings.
2)Early original TI amp box with cupped base.
3)Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
4)Original restored inside and outside windshield stainless trim.
5)original set of 66 roadster door panels.
6)original driveshaft
7)original tire tub and or lid
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.
Last edited by len067; 12-31-2016 at 11:33 AM. Reason: More info
10-09-2016, 11:09 AM
#2
Le Mans Master
Ongoing 66 427/425 Corvette Roadster restoration.
Looking for a set of NOS side exhaust covers and/or moldings.
Early original TI amp box with cupped base.
Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.
Looking for a set of NOS side exhaust covers and/or moldings.
Early original TI amp box with cupped base.
Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.
provette67@aol.com
10-10-2016, 10:07 PM
#4
Intermediate
Thread Starter
Bump
Ongoing 66 427/425 Corvette Roadster restoration.
Looking for a set of NOS side exhaust covers and/or moldings.
Early original TI amp box with cupped base.
Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
Original restored inside and outside windshield stainless trim.
NOS gas lid door for early 66
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.
Looking for a set of NOS side exhaust covers and/or moldings.
Early original TI amp box with cupped base.
Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
Original restored inside and outside windshield stainless trim.
NOS gas lid door for early 66
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.
10-18-2016, 10:45 PM
#6
Advanced
Member Since: Dec 2012
Location: Oviedo FL
Posts: 96
Likes: 0
Received 0 Likes
on
0 Posts
NOS Side Pipe Covers
I have a set of NOS side pipe covers in original box. Send PM if interested in seeing pics.
Fred
Fred
Ongoing 66 427/425 Corvette Roadster restoration.
Looking for a set of NOS side exhaust covers and/or moldings.
Early original TI amp box with cupped base.
Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
Original restored inside and outside windshield stainless trim.
NOS gas lid door for early 66
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.
Looking for a set of NOS side exhaust covers and/or moldings.
Early original TI amp box with cupped base.
Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
Original restored inside and outside windshield stainless trim.
NOS gas lid door for early 66
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.
10-22-2016, 07:50 PM
#7
Intermediate
Thread Starter
Added to list
Ongoing 66 427/425 Corvette Roadster reestoration.
1)Looking for a set of NOS side exhaust covers and/or moldings.
2)Early original TI amp box with cupped base.
3)Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
4)Original restored inside and outside windshield stainless trim.
5)original set of 66 roadster door panel.
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.[/QUOTE]
Ongoing 66 427/425 Corvette Roadster reestoration.
1)Looking for a set of NOS side exhaust covers and/or moldings.
2)Early original TI amp box with cupped base.
3)Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
4)Original restored inside and outside windshield stainless trim.
5)original set of 66 roadster door panel.
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.[/QUOTE]
Last edited by len067; 11-06-2016 at 08:16 PM.
10-29-2016, 09:46 AM
#8
Intermediate
Thread Starter
Bump
Ongoing 66 427/425 Corvette Roadster restoration.
1)Looking for a set of NOS side exhaust covers and/or moldings.
2)Early original TI amp box with cupped base.
3)Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
4)Original restored inside and outside windshield stainless trim.
5)NOS gas lid door for early 66
6)original set of 66 roadster door panels
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.
1)Looking for a set of NOS side exhaust covers and/or moldings.
2)Early original TI amp box with cupped base.
3)Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
4)Original restored inside and outside windshield stainless trim.
5)NOS gas lid door for early 66
6)original set of 66 roadster door panels
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.
11-06-2016, 08:20 PM
#9
Intermediate
Thread Starter
TTT
Ongoing 66 427/425 Corvette Roadster restoration.
1)Looking for a set of NOS side exhaust covers and/or moldings.
2)Early original TI amp box with cupped base.
3)Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
4)Original restored inside and outside windshield stainless trim.
5)original set of 66 roadster door panels.
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.[/QUOTE]
Ongoing 66 427/425 Corvette Roadster restoration.
1)Looking for a set of NOS side exhaust covers and/or moldings.
2)Early original TI amp box with cupped base.
3)Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
4)Original restored inside and outside windshield stainless trim.
5)original set of 66 roadster door panels.
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.[/QUOTE]
11-12-2016, 09:53 PM
#13
Intermediate
Thread Starter
TTT
]Ongoing 66 427/425 Corvette Roadster restoration.
1)Looking for a set of NOS side exhaust covers and/or moldings.
2)Early original TI amp box with cupped base.
3)Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
4)Original restored inside and outside windshield stainless trim.
5)original set of 66 roadster door panels.
6)original driveshaft
7)original tire tub and or lid
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.[/QUOTE]
]Ongoing 66 427/425 Corvette Roadster restoration.
1)Looking for a set of NOS side exhaust covers and/or moldings.
2)Early original TI amp box with cupped base.
3)Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
4)Original restored inside and outside windshield stainless trim.
5)original set of 66 roadster door panels.
6)original driveshaft
7)original tire tub and or lid
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.[/QUOTE]
11-26-2016, 10:22 AM
#15
Instructor
Member Since: Feb 2001
Location: Barnegat New Jersey
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
parts
Ongoing 66 427/425 Corvette Roadster restoration.
1)Looking for a set of NOS side exhaust covers and/or moldings.
2)Early original TI amp box with cupped base.
3)Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
4)Original restored inside and outside windshield stainless trim.
5)original set of 66 roadster door panels.
6)original driveshaft
7)original tire tub and or lid
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.
1)Looking for a set of NOS side exhaust covers and/or moldings.
2)Early original TI amp box with cupped base.
3)Original BB exhaust manifolds dated Aug/Sept/or Oct of 65
4)Original restored inside and outside windshield stainless trim.
5)original set of 66 roadster door panels.
6)original driveshaft
7)original tire tub and or lid
Interested in hearing about any NOS or good original parts for this project.
Appreciate any help with finding these parts.
original complete 4 speed shifter
spare tire tub cover
clutch fan and fan
distributor
side pipe covers(used in only fair condition)
rally wheel rings(2)
