2007 Corvette Z06 Built engine, trans, diff
#1
Pro
Thread Starter
Member Since: May 2012
Location: Weirton West Virginia
Posts: 745
Received 0 Likes
on
0 Posts
2007 Corvette Z06 Built engine, trans, diff
2007 Chevrolet Corvette Z06
19,000 Miles on car
1000 Miles on engine, trans and diff
Velocity Yellow, Ebony interior, 2LZ package, Heated Seats
https://pittsburgh.craigslist.org/cto/6047599063.html
Car is in excellent shape inside and out and needs nothing. I wouldn't hesitate to jump in the car right now and take it on a long road trip. There are a ton of small modifications not listed here that I can and will go over with buyer in person.
Fully built engine, trans and rear end. The car will take pretty much anything you throw at it! I don't need to sell the car and actually planned on keeping it till next spring/summer but figured I'd throw it out there now. Only reason I'm considering getting rid of it is that I'd like a new project to work on with my son. Will consider partial trades on clean Foxbody Mustangs with preferences leaning towards a 93 Cobra. Will also consider 94-95 Mustangs.
Warhawk Aluminum LS7 Block 434 cubic inch engine
11.5 to 1 Compression
Weisco Forged Pistons
Callies Forged Crankshaft
K-1 H-beam Forged Rods
Clevite bearings
Johnson SLR Linkbar Lifters
BTR Stage 4 Camshaft
ARP hardware throughout
ATI Aluminum Harmonic Balancer
New LS7 Blueprinted oil pump
LS7 heads stage 2 CNC ported by WCCH, New Titanium Intake valves, New solid stem SS exhaust valves, 5 angle valve job by TEA, all brand new PM guides, all hand finished by Brian Tooley at BTR, Heads were done up perfect and are absolutely beautiful.
BTR Platium Valve spring kit with Titanium retainers
Comp Cams pushrods
LS7 Rocker Arms with BTR trunion upgrade
Fast 102 Intake manifold ported by BTR, and port matched to heads
Nick Williams 102 throttle body
Vararam Big mouth CAI
Katech Race Spec silicone CAI hoses
Katech Upgraded 10.5 Quart Dry Sump oil tank
Elite Engineering catch can
Injector Dynamics ID1000 fuel injectors
Casper fuel pump hotwire kit
Tuned via HP Tuners by Ed Hutchings @ Hi-tech Tuning
American Racing 1 7/8" Longtube headers w/ 3" Collectors
American Racing 3" offroad X-pipe (American Racing 3" High Flow Cats also included)
LG Motorsports LG4 Catback exhaust
Deka lightweight (15lbs) gel battery with Katech battery block
MGW Flatstick short throw shifter
RKT Performance built T56, billet keys, bronze fork pads, Carbon blocking ring set, built to RKT performance specs
McLeod RXT Twin disk clutch
Ram Billet Flywheel
Tick Performance clutch speedblead
LS7 rear differential upgraded to 500M Shafts
OEM C5 axles
Corvette "Cup" wheels with custom Velocity Yellow ring 18 x 9.5 front & 19 x 12 rear
Nitto NTO5 275-35-18 front tires and Nitto NTO5R 345-30-19 rear tires
Lloyds Jake Racing skull custom floor mats
Corvette Racing Bi-centennial Steering wheel Upgrade with radio controls and Bluetooth
Corvette Bose sound system
Kenwood Head unit with Bluetooth
Corvette Upgraded Carbon center console
Corvette Upgraded Z06 logo armrest
ZR1 rear spoiler
LED tinted tinted taillights
Tinted sidemarkers
Vettenuts Custom sub enclosure w/ JL Audio 10W3 subwoofer
Kenwood Class D Monoblock Amplifier
Will answer questions or take additional pics or videos for truly serious buyers. You can call or text me at 412-352-0399 The car is located in Weirton, WV 26062
$44,000 and will consider partial trades for 79-95 Mustangs with preference leaning towards the 93-95 Cobras.
19,000 Miles on car
1000 Miles on engine, trans and diff
Velocity Yellow, Ebony interior, 2LZ package, Heated Seats
https://pittsburgh.craigslist.org/cto/6047599063.html
Car is in excellent shape inside and out and needs nothing. I wouldn't hesitate to jump in the car right now and take it on a long road trip. There are a ton of small modifications not listed here that I can and will go over with buyer in person.
Fully built engine, trans and rear end. The car will take pretty much anything you throw at it! I don't need to sell the car and actually planned on keeping it till next spring/summer but figured I'd throw it out there now. Only reason I'm considering getting rid of it is that I'd like a new project to work on with my son. Will consider partial trades on clean Foxbody Mustangs with preferences leaning towards a 93 Cobra. Will also consider 94-95 Mustangs.
Warhawk Aluminum LS7 Block 434 cubic inch engine
11.5 to 1 Compression
Weisco Forged Pistons
Callies Forged Crankshaft
K-1 H-beam Forged Rods
Clevite bearings
Johnson SLR Linkbar Lifters
BTR Stage 4 Camshaft
ARP hardware throughout
ATI Aluminum Harmonic Balancer
New LS7 Blueprinted oil pump
LS7 heads stage 2 CNC ported by WCCH, New Titanium Intake valves, New solid stem SS exhaust valves, 5 angle valve job by TEA, all brand new PM guides, all hand finished by Brian Tooley at BTR, Heads were done up perfect and are absolutely beautiful.
BTR Platium Valve spring kit with Titanium retainers
Comp Cams pushrods
LS7 Rocker Arms with BTR trunion upgrade
Fast 102 Intake manifold ported by BTR, and port matched to heads
Nick Williams 102 throttle body
Vararam Big mouth CAI
Katech Race Spec silicone CAI hoses
Katech Upgraded 10.5 Quart Dry Sump oil tank
Elite Engineering catch can
Injector Dynamics ID1000 fuel injectors
Casper fuel pump hotwire kit
Tuned via HP Tuners by Ed Hutchings @ Hi-tech Tuning
American Racing 1 7/8" Longtube headers w/ 3" Collectors
American Racing 3" offroad X-pipe (American Racing 3" High Flow Cats also included)
LG Motorsports LG4 Catback exhaust
Deka lightweight (15lbs) gel battery with Katech battery block
MGW Flatstick short throw shifter
RKT Performance built T56, billet keys, bronze fork pads, Carbon blocking ring set, built to RKT performance specs
McLeod RXT Twin disk clutch
Ram Billet Flywheel
Tick Performance clutch speedblead
LS7 rear differential upgraded to 500M Shafts
OEM C5 axles
Corvette "Cup" wheels with custom Velocity Yellow ring 18 x 9.5 front & 19 x 12 rear
Nitto NTO5 275-35-18 front tires and Nitto NTO5R 345-30-19 rear tires
Lloyds Jake Racing skull custom floor mats
Corvette Racing Bi-centennial Steering wheel Upgrade with radio controls and Bluetooth
Corvette Bose sound system
Kenwood Head unit with Bluetooth
Corvette Upgraded Carbon center console
Corvette Upgraded Z06 logo armrest
ZR1 rear spoiler
LED tinted tinted taillights
Tinted sidemarkers
Vettenuts Custom sub enclosure w/ JL Audio 10W3 subwoofer
Kenwood Class D Monoblock Amplifier
Will answer questions or take additional pics or videos for truly serious buyers. You can call or text me at 412-352-0399 The car is located in Weirton, WV 26062
$44,000 and will consider partial trades for 79-95 Mustangs with preference leaning towards the 93-95 Cobras.
Last edited by gmkillr; 03-17-2017 at 09:00 AM.
The following users liked this post:
gmkillr (12-03-2016)
The following users liked this post:
gmkillr (01-28-2017)
The following users liked this post:
gmkillr (01-28-2017)