When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
They have the cost detailed via a link down in the vendor for sale area. They are giving a 10% discount, cost ends up around $450 plus shipping as they are listed at $495. You have to actually go into the sub-forum to see the post.
Too bad that there is not a group buy offered for a good price, I would be in at that, but right now, with the holidays coming up, that is a good chunk of change.
I have had the original on my 92 for a few years. Mine is lowered quite a bit and have never hit anything, even curb stops, straight on. I have rubbed the bottom a few times, but no damage other than paint scratches on the bottom. This has held up very well.
I have had the original on my 92 for a few years. Mine is lowered quite a bit and have never hit anything, even curb stops, straight on. I have rubbed the bottom a few times, but no damage other than paint scratches on the bottom. This has held up very well.
They have the cost detailed via a link down in the vendor for sale area. They are giving a 10% discount, cost ends up around $450 plus shipping as they are listed at $495. You have to actually go into the sub-forum to see the post.
Too bad that there is not a group buy offered for a good price, I would be in at that, but right now, with the holidays coming up, that is a good chunk of change.
Get five members together and we can do $450 each shipped.
I was strongly considering this piece until the additional cost of $200 was added for the "carbon" finish. Not ruling it out, but not right before Christmas.
But I fear I would destroy it in short order with the way my car gets used. 
12-02-2016, 09:48 PM
Curious about the response to the "Carbon" finish splitter.......
