Nice Aftermarket Valve Covers for LS2? (ditching fuel rail covers)
#1
Drifting
Thread Starter
Nice Aftermarket Valve Covers for LS2? (ditching fuel rail covers)
Hi Yall
Happy Presidents Day
So Im not feeling the Fuel Rail Covers, Im thinking of removing them and exposing the valve covers and coils.
Im thinking about going with the red valve covers below, not sure if they will fit. Please give me your feedback
Happy Presidents Day
So Im not feeling the Fuel Rail Covers, Im thinking of removing them and exposing the valve covers and coils.
Im thinking about going with the red valve covers below, not sure if they will fit. Please give me your feedback
#2
Drifting
Thread Starter
also, the fasteners have a bushing, can i reuse the stockers? and do i need to replace the gasket? or is it a rubber gasket?
The following users liked this post:
jbc1995fb (02-21-2017)
#4
Drifting
Thread Starter
i hear ya, I want something durable like powdercoat thou. I want it to stay looking nice...i got a feeling a rattle can will look like crap after a summer and winter...
The following 2 users liked this post by paulrichy:
Biggie G (02-21-2017),
kalayaan12 (05-18-2019)
The following users liked this post:
corvette312 (02-21-2017)
#10
Instructor
https://www.holley.com/products/fuel.../parts/534-209
and if you just want the covers ...which you would need to paint.
https://www.holley.com/products/ls_p...up/parts/242-1
Last edited by Midiwiz; 02-21-2017 at 10:47 PM.
#11
Melting Slicks
https://www.holley.com/products/fuel.../parts/534-209
and if you just want the covers ...which you would need to paint.
https://www.holley.com/products/ls_p...up/parts/242-1
and if you just want the covers ...which you would need to paint.
https://www.holley.com/products/ls_p...up/parts/242-1