C7&7

Trailered the car down to LMR yesterday to do a little change on my meth setup and do a IAT breakout. First time I've ever hung around the shop and spent the day with the guys and watched Steven tune on the car. Getting it dialed in on E85 (well e40) for the TX2K event in Houston in two weeks.

Huge thanks guys. Big props to Steven and staff for their support on my build over the years from a bone stock car to a 650 package to a 750 package to what it is today.








93 octane vs e40

T/A KID

Cool!!!!!

FYREANT

At this rate your going to have to put wings on it in 6 months because it'll have fighter jet level power

C7&7

I hope so! Although I'm like the 5th lowest HP in the roll racing lineup for TX2K. Every car is WELL over 1000hp. I'm going to need a novi 2200 or a 150 shot after I get outrun by a 1500 wheel Lambo or GTR.

C7BB

Congrats Tim, it's a nice build for sure. I know you're happy with it, and you and I both know it's built right! LMR is top notch!

Elite275

Are you running a 416 or did you put pistons and rods in? Just curious what the redline is set at if you did. I've run the half but never the mile. In the half, I'd like to get my setup where I can cross the line in 4th instead of 5th.

Awesome numbers and build!

C7&7

All forged, but stock displacement. Redline is around 7K I think. Maybe 7200. I shift at 6500 though.

Thanks!

C7&7

Thanks Bubba.

ajrothm

That is some CRAZY power out of a 1500.... Thats a bad *** little blower for sure..

Nice job on that combo!

Hell I struggled to make much over 900 rw on a 402"/F1R combo...


You're gonna have a blast at Tx2k this year. I hope you have some 17" DRs for it.

jacksnorm

Where did you get the Bell mouth inlet?

C7&7

Steven gave it to me but here is the part number.

jacksnorm

Thanks for the info.. My car picked up significant power using a turbosmart blower screen, but I think the BellMouth will work better.

jbenz_21

goddamn all that power!!!

Higgs Boson

can you ask them what the max lb/min the log showed through the MAF? or maybe you can log it when you run it? thanks man!

my 14 C7 made it to 90.10 lb/min but I never dyno'd it so I'd love to compare! :-)

Higgs Boson

can you ask them what the max lb/min the log showed through the MAF? or maybe you can log it when you run it? thanks man!

my 14 C7 made it to 90.10 lb/min but I never dyno'd it so I'd love to compare! :-)

C7&7

Will do. I'll be down there Wednesday - Friday for TX2K

LSX228R

Can't even imagine how fast that car must be I'm only at 560-580rwhp so I guess the (650 package) and I think mines fast.

C7&7

It's a blast to drive for sure.

blue_bomber697

I just can't believe you got 900 wheel out of the 1500 haha. I'm just hoping to get over 800whp on my 1500 without E85. Don't have E85 available in my area.

FYREANT

Not that hard to believe actually. I am adding E85 and will be trying to go for over 800 with my Si Trim spun to the limit! LOL