FS: Jesel Sportsman stainless roller rockers
#1
Drifting
Thread Starter
Jesel Sportsman stainless roller rockers
Jesel Sportsman stainless steel shaft-mount non-adjustable roller rockers, 1.7:1 ratio. These were used when I got them, and I had them on for about 10k miles.
These will need valve cover spacers or aftermarket valve covers. I have the UMI spacers and bolts for an extra $100. And FWIW, I needed longer plug wires with the spacers. I think the L92 (whichever is the Escalade V8) wires worked.
Was asking $950 shipped, now $800 shipped UPS ground
These will need valve cover spacers or aftermarket valve covers. I have the UMI spacers and bolts for an extra $100. And FWIW, I needed longer plug wires with the spacers. I think the L92 (whichever is the Escalade V8) wires worked.
Was asking $950 shipped, now $800 shipped UPS ground
Last edited by Lothar34; 05-26-2017 at 07:00 PM.
#2
Drifting
Thread Starter
The spacers come with longer bolts and standoffs. The extruded rubber gaskets that came with them were junk and tried replacing them with some more rubber but that didn't work either. Copper RTV and Karropak is what's on there now and it worked.