GD-Zo6

Hey Everyone,

So just curious what kind of exhaust you high HP Zo6 guys are running or if you are running straight pipes?

My car is making a little over 800 now on pump gas and doing a few more upgrades and possibly going E85 which will put it into the 900's. My car has long tube header and x-pipe with no cats and the rear mufflers are stock but have the Muffler Mod. As of right now i am using the Lingerfelter LNC 2 step to launch. After using the 2 step a few times the welds inside the muffler crack and i keep getting them rewelded. So i thought about having my exhaust guy just remove the mufflers all together and just run straight pipe?

All advice and opinions are greatly appreciated on what I should be running.

Unreal

Stock forever then went to bb fusion. Should have stayed stock.

realcanuk

Stock NPP mufflers.

RecMech

Was running LG GT4.. Unfortunately my car belches fire every time it gets on the rev limiter.. Melted the packing material in the mufflers, which then solidified and sounded like broken glass.

No fault of LG.. These were great pipes, just not for my race car.

Straight 3" pipes this year

Detoxx03

Stock NPP with long tubes

chpmnsws6

Straight pipes are for grain trucks. I run a Z06 catback straight to a vacuum source. They open under high load conditions so no real restriction issues.

LSX228R

Why is that?

I also have stock npp w/ long tubes. I love how the corsa sports sounds but I know i'll miss being able to shut it up every now and then lol

inspector12

Stock with Cutouts for serious playing.

neverstop

stock with NPP. I believe the highest whp f1x c6 vette was using stock exhaust setup too

schpenxel

Stock w/NPP

Not that I'm really a "high HP" guy, but whatevs

trayack

I run a custom 3 inch stainless setup. Its sectional and V-banded, and also fits past the large pan on the 4L80e. For mufflers the car uses a one off set of Ti mufflers from Borla built back in 2002.



- Travis

needcheese

I am running ZR1 bi-mode with long tube and no cats.

Unreal

$1500 just to make car louder and have reliability issues.

Ls240sx

3" aluminum

lt1z

2" headers to dual 3" x pipe to B&B Gen 3 Fusion.

inspector12

LS240 that's cool and all but pretty ugly with out some kind of tips LOL! Nice VW BTW ha ha

Ls240sx

Yeh I got to the tailpipes and was like... meh im too lazy to make tips today. Im actually running a 3" BB Fusion at the moment. I switch off every once and awhile. I figured there was going to be at least one person catch the Fahrenheit

smokinstorm

Originally sourced from a Studebaker "Grain Truck." As was pointed out above. ^^^

JetstreamGS

3" Corsa Sport

TTZ06VETTE

corsa here 2