FS: Aluminum Spread-bore Intake P/N 458520
#1
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Aluminum Spread-bore Intake P/N 458520
Part number 458520 - Date Code 8/4/1 which I believe to be August 4th, 1981. This part number was used on 350 Chevrolet engines from 1976-1982 which further supports the 1981 date code. Used with Q-Jet carburetors.
This intake is part of the famous Franken-Motor that many of you heard, read, saw featured here on the CF in recent weeks. I have pulled most of the items off of it but there are some that remain. I wire brushed the part number and date code area to read them better and it cleaned up very nicely. It needs a good media blasting and then paint or powder coat it to match your needs.
$25.00 asking price (OBO) plus shipping to your location or $25.00 and you pick it up at my house, either way, looking to net $25.00.
If you have an interest, or questions, or comments, please post them here. If you want a quotation for shipping it to you please provide your zip code and I will give you an estimate.
Thank you for looking and best regards,
David Howard
AllVettes4Me
This intake is part of the famous Franken-Motor that many of you heard, read, saw featured here on the CF in recent weeks. I have pulled most of the items off of it but there are some that remain. I wire brushed the part number and date code area to read them better and it cleaned up very nicely. It needs a good media blasting and then paint or powder coat it to match your needs.
$25.00 asking price (OBO) plus shipping to your location or $25.00 and you pick it up at my house, either way, looking to net $25.00.
If you have an interest, or questions, or comments, please post them here. If you want a quotation for shipping it to you please provide your zip code and I will give you an estimate.
Thank you for looking and best regards,
David Howard
AllVettes4Me
Last edited by AllC34Me; 03-24-2017 at 12:20 PM.
#2
Burning Brakes
That might be nice to have! Could I ask for shipping price to Kissimmee, Fl.34744 I'm also going to check with my brother to see if I can ship to him be cause he is about an hour and a half north of Atlanta and already bringing me a set of seats that I bought from another member in about a week ! Also , I have a set of speado and tach gauges that I haven't gotten out of my 79 parts car and if they are clean and the same as what you are looking for in your other post they are yours! I need to know from you if they are the same as yours and as quick as I can get them out I'll check to see if they are better looking than the ones you have!
Last edited by SPCL FX; 03-25-2017 at 05:51 PM. Reason: Missed a word,misspelled a word
#3
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
That might be nice to have! Could I ask for shipping price to Kissimmee, Fl.34744 I'm also going to check with my brother to see if I can ship to him be cause he is about an hour and a half north of Atlanta and already bringing me a set of seats that I bought from another member in about a week ! Also , I have a set of speado and tach gauges that I haven't gotten out of my 79 parts car and if they are clean and the same as what you are looking for in your other post they are yours! I need to know from you if they are the same as yours and as quick as I can get them out I'll check to see if they are better looking than the ones you have!
#5
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Package has been finished. Box it 26" X 14" X 9" and weighs 19 lbs.
David
David
#6
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
More expensive if I use USPS and FedEx so that is the best rate for shipping.
Let me know if you would like it or not, no harm, no foul if you don't.
Thank you for your inquiry and best regards,
David Howard
AllVettes4Me