Fast intake or no
#1
Fast intake or no
I have a ls2 corvette, with a 10.2:1 compression ratio. I have a few upgrades as well. I was wondering would the FAST 102 intake have any benefits for my setup. I am at 670/540 hp/tq.
Kooks long tube headers
Ecs blower cam
L92 heads
L76 intake
Ferrera race valves
90# injectors
Snow water meth kit 2 nozzles
JMS fuel pump voltage booster
Corsa sport exhaust
P1sc procharger
Intercooler
Finishline transmission level v6
Yank 3k torque converter
Kooks long tube headers
Ecs blower cam
L92 heads
L76 intake
Ferrera race valves
90# injectors
Snow water meth kit 2 nozzles
JMS fuel pump voltage booster
Corsa sport exhaust
P1sc procharger
Intercooler
Finishline transmission level v6
Yank 3k torque converter
#2
Team Owner
IMO, no. Use the money to upgrade head unit. A stock ls3 intake will make 1200+ with ease. If you have the fuel, just turn up the boost if you want more power.
#5
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,193 Likes
on
1,052 Posts
St. Jude Donor '15
Burn the money and post a video of it on youtube instead
Instant subscribers
Instant subscribers
#6
Safety Car
I have a ls2 corvette, with a 10.2:1 compression ratio. I have a few upgrades as well. I was wondering would the FAST 102 intake have any benefits for my setup. I am at 670/540 hp/tq.
Kooks long tube headers
Ecs blower cam
L92 heads
L76 intake
Ferrera race valves
90# injectors
Snow water meth kit 2 nozzles
JMS fuel pump voltage booster
Corsa sport exhaust
P1sc procharger
Intercooler
Finishline transmission level v6
Yank 3k torque converter
Kooks long tube headers
Ecs blower cam
L92 heads
L76 intake
Ferrera race valves
90# injectors
Snow water meth kit 2 nozzles
JMS fuel pump voltage booster
Corsa sport exhaust
P1sc procharger
Intercooler
Finishline transmission level v6
Yank 3k torque converter
#7
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,193 Likes
on
1,052 Posts
St. Jude Donor '15
Lower compression isn't helping
#8
Drifting
I have a fast 102 lxr on my D1SC and like it. Seems to work well on my A4 c5. That's it in the photo.
Last edited by corvet786c; 04-08-2017 at 11:56 AM.
#9
I've been running the stock LS3 intake with no problems but I'm stepping up the game quite a bit this year. I figured it couldn't hurt to make slightly more power at a slightly lower boost level for what I'm trying to accomplish. Besides, the FAST 102 is sexy. I got one fully ported from Tony Mamo to make sure it was all it could be.