For Sale 2000 FRC Corvette (unfinished track car)
#1
Racer
Thread Starter
For Sale 2000 FRC Corvette (unfinished track car)
I have owned the car since 2004. I purchased it in Florida to drive everyday and autocross, track. it currently has 101xxx on it and is located in Beverly Hills, CA. I had plans to cage it and make it a complete track car. I don't really have time to use a dedicated track car at this time and hate to just stick in storage. It is currently registered and smogged. It is by no means a cream puff cosmetically. I t has scratches on every body panel and has only bare bones on the interior. Sparco Sprint driver seat, and stock passenger. C6 Z06 shifter and no passenger air bag. Still has stock airbag in driver steering wheel. No AC or heater core but still has dash. I do have quite a few of the interior parts but not all. I took the door windows out but still have glass. Transmission is fine and rear does not leak. For road coarse or autocross I would put in a rebuilt diff or race LSD of your choice. The stock clutches are slipping a bit in tight corners. Could still make a drag car I guess but would rather see it at the road coarse
LG Motorsports GT2 adjustable Coil Overs
LG Motorsports (T1) anti sway bars w/spherical end links
LG Bump steer kit
Alignment and Corner balanced
AP Racing Brakes Stock size rotors like new (not installed, need rotors)
4 18X10.5 2 Speedline 2 Alcoa Z06 Wheels
4 knockoff SS/Zr1 wheels in 17/9.5 17/11 w/ Nitto 555R2s
ACP Splitter overlay (not installed)
Stock bottom end original 346 LS1
Refreshed MTI (Houston) stage 2.5 heads Ferrea 202 intake valves Milled for 11:1 compression
LS6 Intake
225/225/589/112 Texas Speed mild cam (easy on valve train)
New Double Valve springs and guides, pushrods
ATI underdrive harmonic Balancer
New sensors, gaskets, total rebuild top end new water pump, oil pump etc with less than 500 miles on it.
Bottom end tested just fine and within spec according to LG Motorsports
Textralia Clutch
Tri Y headers no cats w/ Magnaflow X pipe and catback
Stock Trans and rear with 3.42 gears
Sparco Sprint seat (Black) on slider
Hardbar Harness Bar w/6pt Safequip harness
$9500 or $8500 without Z06 wheels and/or brakes.
Please no really crazy lowball offers as i am in no real hurry to sell. Will take some better photos this week and post. I work from home so will get that done tomorrow.
Thanks,
Derek
LG Motorsports GT2 adjustable Coil Overs
LG Motorsports (T1) anti sway bars w/spherical end links
LG Bump steer kit
Alignment and Corner balanced
AP Racing Brakes Stock size rotors like new (not installed, need rotors)
4 18X10.5 2 Speedline 2 Alcoa Z06 Wheels
4 knockoff SS/Zr1 wheels in 17/9.5 17/11 w/ Nitto 555R2s
ACP Splitter overlay (not installed)
Stock bottom end original 346 LS1
Refreshed MTI (Houston) stage 2.5 heads Ferrea 202 intake valves Milled for 11:1 compression
LS6 Intake
225/225/589/112 Texas Speed mild cam (easy on valve train)
New Double Valve springs and guides, pushrods
ATI underdrive harmonic Balancer
New sensors, gaskets, total rebuild top end new water pump, oil pump etc with less than 500 miles on it.
Bottom end tested just fine and within spec according to LG Motorsports
Textralia Clutch
Tri Y headers no cats w/ Magnaflow X pipe and catback
Stock Trans and rear with 3.42 gears
Sparco Sprint seat (Black) on slider
Hardbar Harness Bar w/6pt Safequip harness
$9500 or $8500 without Z06 wheels and/or brakes.
Please no really crazy lowball offers as i am in no real hurry to sell. Will take some better photos this week and post. I work from home so will get that done tomorrow.
Thanks,
Derek
Last edited by apexman; 01-17-2015 at 08:59 PM.
#2
Burning Brakes
Nice car and good luck with the sale. Interested in selling the set of 4 (speedlines and alcoas) I am in need of a set for this specific purpose.
if so shoot me a PM thanks
if so shoot me a PM thanks
#3
Racer
Thread Starter
Not interested at the moment. I will let you know if I plan to part out. Thanks and happy holidays!
#6
Racer
Thread Starter
Plan on getting a C6 Z06 hopefully before March. I really just need something more practical right now. I thought about getting a tow vehicle to tow it and then store the car. I just can't see myself driving a tow vehicle around here. My wife would hate it even more so we agreed on finding a C6 Z06. The CTS-V is fine for the daily, we love it!
Derek