White 99 Corvette FRC LS3 swapped
10-11-2016, 03:13 AM
#1
Advanced
Thread Starter
Member Since: Apr 2008
Location: Orange County CA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
White 99 Corvette FRC LS3 swapped
Up for sale is my Arctic White 1999 Chevy Corvette FRC. Clean CA title. Has 113k miles on the body, less than 40k on LS3 engine. Registration is current. No check engine lights.
Car is is 1 of less than 300 made in this color for 1999. It is the rarest color, next to Nassau Blue. The LS1 was replaced with an LS3 from an 09 Corvette. It is a "cam only" setup with stock untouched heads/intake manifold.
The only problem with the car is that the Air Conditioning doesn't blow cold. The AC Compressor went bad a few months ago. Other then that, it has no problems. I am simply selling it because I already bought a different car.
All modifications are fresh, being done in Feb of this year. In 2015, the car was sold from the original owner to a 2nd owner. The 2nd owner had it for about 6 months then sold it to me in October 2015. All work has been done by my good friend, who owns a local GM Performance shop in Orange County (you may know him as "Corvette Chris" around the LS community, from Attracktion). The modifications are as follows:
ENGINE:
-Low mileage LS3 removed from 2009 Corvette
-Stock LS3 heads and stock LS3 intake manifold
-Texas Speed 231/236 .640"/.615" camshaft on 111 LSA
-PRC .660" Dual Valve Springs
-Titanium retainers
-7.4" chromemoly push rods
-LS2 timing chain
-LS2 throttle body
-Airaid cold air intake
-Stainless works 1 3/4" long tube headers & x-pipe
-High flow cats
-Dyno tune by Tom (makes 485 HP at the WHEELS)
SUSPENSION/CHASIS:
-C6 Z51 sway bars
-Replaced metal sway bar end links with updated style
-Solid Urethane engine and transmission mounts from Hinson Motorsports
-Elite Engineering Rocker Panel Guards
TRANSMISSION/REAR DIFF:
-ACT twin disk heavy duty clutch (rated to 750 ft/lbs)
-Hurst Short Throw Shifter w/ Delrin shift ****
EXTERIOR MODIFICATIONS:
-ACI rear spoiler, painted flat black
-OE Wheels Machine Face C5 Deep Dish wheels. 18x10.5 rear, 18x9.5 front
-OEM C5 Z06 rear brake vent ducts
-WCC "domed" rear Corvette bumper lettering inserts
-Flat black rear lower bumper mod
-Z06 front bumper grilles
-4300k low beam HID kit installed into factory headlight housings
-Limo tint all the way around
-All exterior lights tinted professionally
INTERIOR:
-Black leather C6 Corvette seats
-Pioneer bluetooth radio (stream music and talk on the phone wirelessly)
-Delrin shift ****
-Carbon fiber radio bezel
The paint and overall inside/outside appearance is a 9.5 out of 10 stars. Has 2 or 3 small chips on the front bumper and very minor rock chips below the rear brake ducts. The wheels are perfect and have no scratches or curb rash. The interior has no rips on the seats, or any fading or cracking on the dash.
updated 10/31 - Price is now $16,500 obo
I may not get around to check this posting too much, so if interested, preferably call or text me at 949-836-6945
Thanks for looking.
Car is is 1 of less than 300 made in this color for 1999. It is the rarest color, next to Nassau Blue. The LS1 was replaced with an LS3 from an 09 Corvette. It is a "cam only" setup with stock untouched heads/intake manifold.
The only problem with the car is that the Air Conditioning doesn't blow cold. The AC Compressor went bad a few months ago. Other then that, it has no problems. I am simply selling it because I already bought a different car.
All modifications are fresh, being done in Feb of this year. In 2015, the car was sold from the original owner to a 2nd owner. The 2nd owner had it for about 6 months then sold it to me in October 2015. All work has been done by my good friend, who owns a local GM Performance shop in Orange County (you may know him as "Corvette Chris" around the LS community, from Attracktion). The modifications are as follows:
ENGINE:
-Low mileage LS3 removed from 2009 Corvette
-Stock LS3 heads and stock LS3 intake manifold
-Texas Speed 231/236 .640"/.615" camshaft on 111 LSA
-PRC .660" Dual Valve Springs
-Titanium retainers
-7.4" chromemoly push rods
-LS2 timing chain
-LS2 throttle body
-Airaid cold air intake
-Stainless works 1 3/4" long tube headers & x-pipe
-High flow cats
-Dyno tune by Tom (makes 485 HP at the WHEELS)
SUSPENSION/CHASIS:
-C6 Z51 sway bars
-Replaced metal sway bar end links with updated style
-Solid Urethane engine and transmission mounts from Hinson Motorsports
-Elite Engineering Rocker Panel Guards
TRANSMISSION/REAR DIFF:
-ACT twin disk heavy duty clutch (rated to 750 ft/lbs)
-Hurst Short Throw Shifter w/ Delrin shift ****
EXTERIOR MODIFICATIONS:
-ACI rear spoiler, painted flat black
-OE Wheels Machine Face C5 Deep Dish wheels. 18x10.5 rear, 18x9.5 front
-OEM C5 Z06 rear brake vent ducts
-WCC "domed" rear Corvette bumper lettering inserts
-Flat black rear lower bumper mod
-Z06 front bumper grilles
-4300k low beam HID kit installed into factory headlight housings
-Limo tint all the way around
-All exterior lights tinted professionally
INTERIOR:
-Black leather C6 Corvette seats
-Pioneer bluetooth radio (stream music and talk on the phone wirelessly)
-Delrin shift ****
-Carbon fiber radio bezel
The paint and overall inside/outside appearance is a 9.5 out of 10 stars. Has 2 or 3 small chips on the front bumper and very minor rock chips below the rear brake ducts. The wheels are perfect and have no scratches or curb rash. The interior has no rips on the seats, or any fading or cracking on the dash.
updated 10/31 - Price is now $16,500 obo
I may not get around to check this posting too much, so if interested, preferably call or text me at 949-836-6945
Thanks for looking.
Last edited by Jeremy S; 10-31-2016 at 06:55 PM.
10-25-2016, 11:15 PM
#4
Melting Slicks
Damn - that Vette looks NICE. 
10-31-2016, 06:39 PM
#5
Advanced
Thread Starter
Member Since: Apr 2008
Location: Orange County CA
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
10-31-2016, 06:54 PM
#6
Melting Slicks
Can a guy have two smog 'problems'? 