I put approximately 10k miles on this kit in the 2 years I had it. It made 751rwhp on my stock shortblock with stock heads. The only part missing here is 1 silicone coupler for the blower inlet available for $12-$30 such as this one http://www.amazon.com/Vibrant-2716-B.../dp/B001806VAO
. I removed this kit myself, and I made sure to get every single piece. Parts included:
A&A kit with ram air intercooler and all sheet metal to box it in.
T-trim v3 upgrade (self contained)
4 oz oil for blower
All fasteners, etc from kit
KB BAP with racetronix hotwire kit
8-rib tensioner, blower, and idler pulleys on bracket
Upgraded Tial 50mm BOV
Crank pinning fixture seen in pics. Needs the 1/4" pin available at any hardware store for $0.50.
The 8-rib pullies on the bracket will work fine with your 6 rib accessories, and will save you money if you upgrade later. The other 8-rib parts are for sale separately.
You will need upgraded injectors.
You can see the fitting on the drain line is scuffed up. It is cosmetic, but you could use a new plug easily if you like.
I'm asking $3,500. Shipping and/or payal fees are at the buyer's expense. 70lbs and likely 2 boxes.