***LMR Prototype C7 Cold Air Induction System***
#1
Supporting Vendor
Thread Starter
***LMR Prototype C7 Cold Air Induction System***
Finally got something to share with you guys. It will still be a few weeks before we see a finished product. Any questions please feel free to contact the shop or Support@latemodelracecraft.com
__________________
Worlds Quickest C8 Corvette 8.83@160MPH
FIRST C7 Corvette in the 7's & 9's
FIRST C7 Corvette in the 7's & 9's
2019 ZR1 LT5 8.874 @ 155
Current C7 World Record Holder 7.55 @ 184 MPH
Quickest and Fastest GEN5 LT Powered Vehicle
LMR1200HP Supercharged C7 8.84 @ 160
LMR1200HP Twin Turbo C7 9.35@155mph-2014
2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010
9.47 ZR1 Corvette-2009
LATE MODEL RACECRAFT
713-466-9900
LateModelRacecraft.com
Too many PMs, please call or email instead, thanks!
Current C7 World Record Holder 7.55 @ 184 MPH
Quickest and Fastest GEN5 LT Powered Vehicle
LMR1200HP Supercharged C7 8.84 @ 160
LMR1200HP Twin Turbo C7 9.35@155mph-2014
2 TIME OUTLAW DRAG RADIAL LSX CHAMPION 2008/2010
9.47 ZR1 Corvette-2009
LATE MODEL RACECRAFT
713-466-9900
LateModelRacecraft.com
Too many PMs, please call or email instead, thanks!
#2
Supporting Vendor
Thread Starter
Guys, this is a very long process to develop the correct system. It is currently in 3D scan and I should be able to share more pictures sometime next week. I promise you guys this Cold Air Induction System will be one of if not the best system on the market once completed. That is from a design aspect, quality, and performance!
#3
Supporting Vendor
Thread Starter
The LMR CAI system is still in development and will be tested over the holidays and beginning of new year. Product should be 100 percent complete and ready to ship by end of January(that is our goal). Our Heads/Cam package is going to pick up significantly with our cold air induction system. I cant wait to show you guys a finished product.
#4
Supporting Vendor
Thread Starter
I believe the only air intake on the market today showed 13hp gains on an engine dyno and a 19rwhp gain on a car with Heads/Cam. The system looks great and seems to preform well.
Installed one of our prototype pieces on the dyno today for some testing. Initial results where 13rwhp and 8rwtq. This unit is on a BONE stock automatic car. Car made 410rwhp stock and 423rwhp with this test unit. We plan on making small changes and will do some more testing late next week with something closer to our actual production system. Remember, we are still in the R&D phase so this prototype piece is not great on the eyes. We will not release this system until we know it looks/fits as well as it performs.