THE DFW Weekly GTG : North Dallas, Plano, Frisco, McKinney, Richardson, + Area #24
#3641
Instructor
Had to post this here too... good for a laugh !
http://losangeles.craigslist.org/lac...939287009.html
And its in Dallas... anyone want to go check it out ?
Toque
http://losangeles.craigslist.org/lac...939287009.html
And its in Dallas... anyone want to go check it out ?
Toque
#3642
Well its been quite a while since I have seen many of you. Hope everyone is well. I am changing careers and am buying an Allstate insurance agency in June. Unfortunately this change will be eating into my play budget and I want to sell my C5Z. I recently had all of the performance parts and ls7 pulled out by 21st century and would like to offer the parts locally to you guys before posting in the main forum. I still need to clean them up for pictures and such but they are all in pretty good shape as I only had them on the car for 10k miles.
Is anyone opposed to me listing my parts here first instead of the main for sale forum? I'd much rather sell locally if possible.
Is anyone opposed to me listing my parts here first instead of the main for sale forum? I'd much rather sell locally if possible.
#3644
Le Mans Master
Had to post this here too... good for a laugh !
http://losangeles.craigslist.org/lac...939287009.html
And its in Dallas... anyone want to go check it out ?
Toque
http://losangeles.craigslist.org/lac...939287009.html
And its in Dallas... anyone want to go check it out ?
Toque
#3645
Built and balanced 427 LS7 by Kim Barr in Garland, TX 12k miles 545 RWHP 525T
This engine is a beast, quick to rev with plenty of power for my C5-Z. It's never seen the track and was well cared for. The only thing it needs is the pan gasket replaced as the original installer didn't get it sealed up. Not much was spared as you can see from the parts and work listed below. I probably have 7-8K in specialized parts and labor on top of the engine cost. The project got away from me! Sorry for the long post.
Engine
Mahle Forged Pistons ($700)
OEM titanium rods
ARP2000 Rod Bolts ($200)
Katech Torquer LS7 110 Cam ($500)
ARP Polished Stainless 12 point bolt set ($400)
Edlebrock two piece cam cover ($200)
Katech C5R Timing chain ($150)
SLP Harmonic Balancer Underdrive Pulley ($200)
24x reluctor wheel
LS2 Oil Pan
Heads
OEM Casting, Hand ported & drum roll finished by Reher Morrison Arlington, TX
New bronze valve guides
Milled .010
Stainless Exhaust Valves ($400 cant remember the brand but they don't use cheap stuff here)
ARP Head Bolts ($130)
Patriot Gold LS Dual Valve Spring & Titanium Retainers ($350)
Comp Cams Trunion Upgraded Rockers ($150)
The Rest
OEM Intake Manifold
FAST 60lb injectors ($475)
OEM LS2 TB
Polished Holley Valve covers with integrated coil pack mounts ($240)
8 surface mount coil packs
ARP Crank bolt
Complete engine. $10,000
Pictures
before installation: http://imgur.com/bUUumsm
in the car: http://imgur.com/sz5lJkJ
after removal: http://imgur.com/5C87yAs
Other Items for Sale:
LG G2 Coilovers 12k miles $1600 (Orig $2400)
XS Power True 3" Stainless Exhaust $500
Dewitts Radiator with engine oil Cooler, Dual Spal fans with Shroud, Oil Cooler adapter and AN lines. $900(Paid $1400)
TSP C5 Headers with off road mid pipe, O2 sensors and extensions $320 (Orig $650) Headers are dented on the bottom due to car height.
Corvette C5/Z06, C6/Z06 1/4" Thick Tunnel Plate with insulation $80 (Orig $160+50 for the insulation)
Lokar 1220074 Anchor-Tight Brite Flexible Engine Dipstick $60
LS7 Dry Sump Oil Pan $300
LS7 Dry Sump Oil Pump and Cover $200
New SLP rear spoiler $100 http://www.vividracing.com/catalog/-p-150889712.html
New Vette Nuts C5 Premium Insulation Layer Ensolite Pre Installed on Foil Kit $200 http://www.vettenuts.net/index.php?l...t_detail&p=753
email me at jasonwfleming@gmail.com or txt me at 214-755-3584
This engine is a beast, quick to rev with plenty of power for my C5-Z. It's never seen the track and was well cared for. The only thing it needs is the pan gasket replaced as the original installer didn't get it sealed up. Not much was spared as you can see from the parts and work listed below. I probably have 7-8K in specialized parts and labor on top of the engine cost. The project got away from me! Sorry for the long post.
Engine
Mahle Forged Pistons ($700)
OEM titanium rods
ARP2000 Rod Bolts ($200)
Katech Torquer LS7 110 Cam ($500)
ARP Polished Stainless 12 point bolt set ($400)
Edlebrock two piece cam cover ($200)
Katech C5R Timing chain ($150)
SLP Harmonic Balancer Underdrive Pulley ($200)
24x reluctor wheel
LS2 Oil Pan
Heads
OEM Casting, Hand ported & drum roll finished by Reher Morrison Arlington, TX
New bronze valve guides
Milled .010
Stainless Exhaust Valves ($400 cant remember the brand but they don't use cheap stuff here)
ARP Head Bolts ($130)
Patriot Gold LS Dual Valve Spring & Titanium Retainers ($350)
Comp Cams Trunion Upgraded Rockers ($150)
The Rest
OEM Intake Manifold
FAST 60lb injectors ($475)
OEM LS2 TB
Polished Holley Valve covers with integrated coil pack mounts ($240)
8 surface mount coil packs
ARP Crank bolt
Complete engine. $10,000
Pictures
before installation: http://imgur.com/bUUumsm
in the car: http://imgur.com/sz5lJkJ
after removal: http://imgur.com/5C87yAs
Other Items for Sale:
LG G2 Coilovers 12k miles $1600 (Orig $2400)
XS Power True 3" Stainless Exhaust $500
Dewitts Radiator with engine oil Cooler, Dual Spal fans with Shroud, Oil Cooler adapter and AN lines. $900(Paid $1400)
TSP C5 Headers with off road mid pipe, O2 sensors and extensions $320 (Orig $650) Headers are dented on the bottom due to car height.
Corvette C5/Z06, C6/Z06 1/4" Thick Tunnel Plate with insulation $80 (Orig $160+50 for the insulation)
Lokar 1220074 Anchor-Tight Brite Flexible Engine Dipstick $60
LS7 Dry Sump Oil Pan $300
LS7 Dry Sump Oil Pump and Cover $200
New SLP rear spoiler $100 http://www.vividracing.com/catalog/-p-150889712.html
New Vette Nuts C5 Premium Insulation Layer Ensolite Pre Installed on Foil Kit $200 http://www.vettenuts.net/index.php?l...t_detail&p=753
email me at jasonwfleming@gmail.com or txt me at 214-755-3584
#3647
Tech Contributor
Thread Starter
Built and balanced 427 LS7 by Kim Barr in Garland, TX 12k miles 545 RWHP 525T
This engine is a beast, quick to rev with plenty of power for my C5-Z. It's never seen the track and was well cared for. The only thing it needs is the pan gasket replaced as the original installer didn't get it sealed up. Not much was spared as you can see from the parts and work listed below. I probably have 7-8K in specialized parts and labor on top of the engine cost. The project got away from me! Sorry for the long post.
This engine is a beast, quick to rev with plenty of power for my C5-Z. It's never seen the track and was well cared for. The only thing it needs is the pan gasket replaced as the original installer didn't get it sealed up. Not much was spared as you can see from the parts and work listed below. I probably have 7-8K in specialized parts and labor on top of the engine cost. The project got away from me! Sorry for the long post.
Your car was a BEAST for sure last time I saw it.
Good luck with the sale and the new business venture !
Toque
#3648
Melting Slicks
Mechanic advice
Hey fellas,
I have a friend that just moved to Plano from Vegas and is wanting to do some bolt ons for his 03 Z06. I thought I remember some of you speaking highly of someone out that way. Would you mind letting me know his contact info?
Thanks,
Steven
I have a friend that just moved to Plano from Vegas and is wanting to do some bolt ons for his 03 Z06. I thought I remember some of you speaking highly of someone out that way. Would you mind letting me know his contact info?
Thanks,
Steven
#3649
Tech Contributor
Thread Starter
Plenty of good shops around Dallas.
He should go to some of these shops and see what/who he feels most comfortable with.
Quality Motorsports - Lewisville
LG Motorsports - Plano
True Street Motorsports - McKinney
21st Century Motorsports - Addison
Everyone in our group has had experiences with the above.
Toque
#3650
Melting Slicks
Steven:
Plenty of good shops around Dallas.
He should go to some of these shops and see what/who he feels most comfortable with.
Quality Motorsports - Lewisville
LG Motorsports - Plano
True Street Motorsports - McKinney
21st Century Motorsports - Addison
Everyone in our group has had experiences with the above.
Toque
Plenty of good shops around Dallas.
He should go to some of these shops and see what/who he feels most comfortable with.
Quality Motorsports - Lewisville
LG Motorsports - Plano
True Street Motorsports - McKinney
21st Century Motorsports - Addison
Everyone in our group has had experiences with the above.
Toque
Thanks again!!!
#3651
Safety Car
Steven:
Plenty of good shops around Dallas.
He should go to some of these shops and see what/who he feels most comfortable with.
Quality Motorsports - Lewisville
LG Motorsports - Plano
True Street Motorsports - McKinney
21st Century Motorsports - Addison
Everyone in our group has had experiences with the above.
Toque
Plenty of good shops around Dallas.
He should go to some of these shops and see what/who he feels most comfortable with.
Quality Motorsports - Lewisville
LG Motorsports - Plano
True Street Motorsports - McKinney
21st Century Motorsports - Addison
Everyone in our group has had experiences with the above.
Toque
#3652
Tech Contributor
Thread Starter
Beautiful day today guys !
See everyone tonight !
PS..... Morning cup of Coffee coming right up....
Toque
See everyone tonight !
PS..... Morning cup of Coffee coming right up....
Toque
#3653
Tim,
Looks AW SOME!! congrats.
Looks AW SOME!! congrats.
Well guys the cars been under the knife for quite some time
Just wanted to share some "finished" photos.
ECS blower
AR Headers
HRE's
Z06 front grille
Removed the stingray emblems
lowered it a bit
She's done.
Was able to go take some high res pictures tonight.
Lighting wasn't perfect but they look sick
Just wanted to share some "finished" photos.
ECS blower
AR Headers
HRE's
Z06 front grille
Removed the stingray emblems
lowered it a bit
She's done.
Was able to go take some high res pictures tonight.
Lighting wasn't perfect but they look sick
#3654
Tech Contributor
Thread Starter
Great night at Coit last night, and sounds like were going to Kellers tonight !
Hal's Steak Sandwich was killer last night !
See ya'll soon !
Toque
Hal's Steak Sandwich was killer last night !
See ya'll soon !
Toque
#3657
Melting Slicks
#3658
Le Mans Master
Member Since: Mar 2001
Location: Omaha
Posts: 6,594
Received 2,276 Likes
on
1,193 Posts
2020 Corvette of the Year Finalist (performance mods)
C4 of Year Winner (performance mods) 2019
#3660
Le Mans Master
Member Since: Mar 2001
Location: Omaha
Posts: 6,594
Received 2,276 Likes
on
1,193 Posts
2020 Corvette of the Year Finalist (performance mods)
C4 of Year Winner (performance mods) 2019
Details are always kept updated in the first post of the thread, we meet every Sunday at:
Brick House Tavern + Tap
4900 W Park Blvd, Plano, TX
(972) 596-0916
brickhousetavernandtap.com
We typically arrive between 6:30-7, and go in to eat at about 7PM.
Brick House Tavern + Tap
4900 W Park Blvd, Plano, TX
(972) 596-0916
brickhousetavernandtap.com
We typically arrive between 6:30-7, and go in to eat at about 7PM.