Corvette Tuning Specials from D3 Performance Engineering in Houston, TX
#1
Former Vendor
Thread Starter
Corvette Tuning Specials from D3 Performance Engineering in Houston, TX
D3 Performance Engineering is happy to extend a special 10% off for any tune to any active member of the Corvette Forum community.
We are one of the leading tuning & fabrication houses in Houston, with owner and lead tuner Chris Delgado leading the way in our performance calibration department, we typically perform 2-3 full calibrations per day, and would love to have more members of the Corvette Forum family call D3 Performance Engineering their home shop.
We are one of the top Pro EFI installers in the world, and we also offer calibrations for MoTec, Big Stuff 3, HP Tuners, and many others.
Contact us today to learn more about what D3 Performance Engineering can do for you. Typically we are 2-4 weeks out on tuning appointments, so make sure to schedule yours today!
You can call us between 9-5 M-F at 832-230-1094 or email us, Sales@D3PerformanceEngineering.com
We are one of the leading tuning & fabrication houses in Houston, with owner and lead tuner Chris Delgado leading the way in our performance calibration department, we typically perform 2-3 full calibrations per day, and would love to have more members of the Corvette Forum family call D3 Performance Engineering their home shop.
We are one of the top Pro EFI installers in the world, and we also offer calibrations for MoTec, Big Stuff 3, HP Tuners, and many others.
Contact us today to learn more about what D3 Performance Engineering can do for you. Typically we are 2-4 weeks out on tuning appointments, so make sure to schedule yours today!
You can call us between 9-5 M-F at 832-230-1094 or email us, Sales@D3PerformanceEngineering.com
#2
Former Vendor
Thread Starter
Daniel brought us his C5Z06 in today with ECS kit, Automatic Conversion, and put down some great power using HP Tuners calibration software.
Contact us today by PM, emailing us at Sales@D3PerformanceEngineering.com or calling us, 832-230-1094 to check appointment availability for your tuning needs!
Contact us today by PM, emailing us at Sales@D3PerformanceEngineering.com or calling us, 832-230-1094 to check appointment availability for your tuning needs!
#3
Former Vendor
Thread Starter
Scott brought his C6 Z06 here to D3 Performance Engineering for a Pro EFI 128 system, with traction control, progressive nitrous, and other great features available with the D3 Performance Engineering installed Pro EFI 128.
If you haven't seen Pro EFI systems and what they do, I encourage you to check them out by clicking here.
Scott's car made some great power on the dyno, while still retaining all of the creature comforts and functionality it rolled off of your local GM dealer's showroom with!
Scott's car spun the rollers to the tune of 800 wheel horsepower on nitrous.
We enjoyed contributing to Scott's pursuit of speed, and he is very happy with the results.
For more information on our tuning, wiring, or services in general, give us a shout!
You can stop by our facility on the Northwest side of Houston, or you can call us 832-230-1094 or email us, Sales@D3PerformanceEngineering.com
Make sure to mention you saw us here for tuning specials!
If you haven't seen Pro EFI systems and what they do, I encourage you to check them out by clicking here.
Scott's car made some great power on the dyno, while still retaining all of the creature comforts and functionality it rolled off of your local GM dealer's showroom with!
Scott's car spun the rollers to the tune of 800 wheel horsepower on nitrous.
We enjoyed contributing to Scott's pursuit of speed, and he is very happy with the results.
For more information on our tuning, wiring, or services in general, give us a shout!
You can stop by our facility on the Northwest side of Houston, or you can call us 832-230-1094 or email us, Sales@D3PerformanceEngineering.com
Make sure to mention you saw us here for tuning specials!
#4
Melting Slicks
Scott brought his C6 Z06 here to D3 Performance Engineering for a Pro EFI 128 system, with traction control, progressive nitrous, and other great features available with the D3 Performance Engineering installed Pro EFI 128.
If you haven't seen Pro EFI systems and what they do, I encourage you to check them out by clicking here.
Scott's car made some great power on the dyno, while still retaining all of the creature comforts and functionality it rolled off of your local GM dealer's showroom with!
Scott's car spun the rollers to the tune of 800 wheel horsepower on nitrous.
We enjoyed contributing to Scott's pursuit of speed, and he is very happy with the results.
For more information on our tuning, wiring, or services in general, give us a shout!
You can stop by our facility on the Northwest side of Houston, or you can call us 832-230-1094 or email us, Sales@D3PerformanceEngineering.com
Make sure to mention you saw us here for tuning specials!
If you haven't seen Pro EFI systems and what they do, I encourage you to check them out by clicking here.
Scott's car made some great power on the dyno, while still retaining all of the creature comforts and functionality it rolled off of your local GM dealer's showroom with!
Scott's car spun the rollers to the tune of 800 wheel horsepower on nitrous.
We enjoyed contributing to Scott's pursuit of speed, and he is very happy with the results.
For more information on our tuning, wiring, or services in general, give us a shout!
You can stop by our facility on the Northwest side of Houston, or you can call us 832-230-1094 or email us, Sales@D3PerformanceEngineering.com
Make sure to mention you saw us here for tuning specials!
#7
Former Vendor
Thread Starter
Bob brought us this pristine restored 1964 Stingray, packing a GM Performance Parts ZZ430 crate engine, Hillburn throttles and Fast Engine Management. We upgraded some of the fuel system components, and got this vehicle to where it runs and drives like a brand new car, but still has the incredible sound and sensation of driving an iconic half-century old Corvette.
An absolutely incredible car we had the pleasure of tuning.
Bob's car put down a solid 384 horsepower to the ground through our DynoCom chassis dyno.
An absolutely incredible car we had the pleasure of tuning.
Bob's car put down a solid 384 horsepower to the ground through our DynoCom chassis dyno.
#8
Former Vendor
Thread Starter
We have some openings after Texas Invitational available, call us today!
832-230-1094 or Sales@D3PerformanceEngineering.com
We're typically booked up about two weeks ahead of time so call in advance to set your appointment!
832-230-1094 or Sales@D3PerformanceEngineering.com
We're typically booked up about two weeks ahead of time so call in advance to set your appointment!