CPR blower package on the dyno!
#1
Supporting Vendor
Thread Starter
CPR blower package on the dyno!
Scott drove this C7 down from Vegas for us to install one of our blower packages on it. Quick turnaround and on the vegas builds I personally hand deliver them back to the customer if they wish. Just cover my travel expenses is all.
This car got the following.
A&A kit (s-trim) 3.8 upper standard lower
Alky control meth kit
Car is an A6 as well. 580/528 on 7.5 psi, car only has 9 degrees of timing in it as we do not turn off the knock sensors!
If you have any questions about this package please let us know how we can help you out. The kit can be interchanged w/ an ECS kit also, the customer just purchased the kit directly from A&A as they had a sale going on.
This car got the following.
A&A kit (s-trim) 3.8 upper standard lower
Alky control meth kit
Car is an A6 as well. 580/528 on 7.5 psi, car only has 9 degrees of timing in it as we do not turn off the knock sensors!
If you have any questions about this package please let us know how we can help you out. The kit can be interchanged w/ an ECS kit also, the customer just purchased the kit directly from A&A as they had a sale going on.
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914