CPR Stage 1 Z with flex fuel dyno.
#1
Supporting Vendor
Thread Starter
CPR Stage 1 Z with flex fuel dyno.
We just finished up another C7Z that previously got our stage 1 package, we currently in AZ have e54 at the pump so this car was setup on that. previous numbers on 91 were 604/614, now it's 636/691! Car is an A8 also.
This vehicle has the following CPR produced parts
2.31 upper pulley kit (only upper this small that does not require machining of the snout)
longtubes (2'' offroad x)
heat exchanger
low side fuel system
in addition to the CPR brand products it also has the following:
Dedicated motorsports flex fuel kit
B3R ice tank
Halltech CAI
Any of these items are available in our webstore and in stock available for immediate shipping! Or with installation at our facility.
This vehicle has the following CPR produced parts
2.31 upper pulley kit (only upper this small that does not require machining of the snout)
longtubes (2'' offroad x)
heat exchanger
low side fuel system
in addition to the CPR brand products it also has the following:
Dedicated motorsports flex fuel kit
B3R ice tank
Halltech CAI
Any of these items are available in our webstore and in stock available for immediate shipping! Or with installation at our facility.
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914