This is a local DFW sale for now unless you want to pay for shipping. I might be willing to part something out depending on the part (EXCEPT THE ROLLER)
. The more you buy the better the deal. Everything is used unless stated otherwise. I live in south Arlington. I'm offering fair and reasonable prices so lowballers don't even waste my time.
110k 1998 trans am roller M6, clean tittle, the interior is in very good condition, it has 4 kenwood speakers and a alpine stereo but the detachable face was stolen. The exterior has a few door dings and scratches, small cracks on fenders and rear bumper. I don't know the brand of the SFC and LCARB, they were already installed when I bought the car.
Original Ram Air WS6 hood
Old set up tune 98 ECU and wiring harness
Weld-on 3 point tubular subframe connectors
Weld-on LCA relocation brackets
Single adjustable panhard bar
Power steering pump
Stock torque arm, driveshaft and crossmember
Stock lower air box and m6 center console
Front license plate cover
New fog light bulbs
$2500 picked up
TDP stage 2 T56 transmission, 30k miles since the upgrade.
140k 2005 Escalade LQ9, the deck has a little bit rust but it's real smooth so it shouldn't be a problem, it has a new 8620 cam from cam motion that was custom spec'd out by Martin Smallwood ($465 cam). The rear cover area hasn't been painted and the rear cover hasn't been taken off, the UD pulley and balancer bolt haven't been installed yet but everything else is already installed and torqued to specs.
new 8620 cam 227/231, .620/601, 114LSA
new melling oil pump 10295
new LS2 timing chain 12646386
new front cover seal and new gasket Fel-Pro TCS 45993
f body oil pan with new GM gasket 12612350
f body windage tray, pick up tube and dipstick tube/stick
30k SLP 25% UD pulley, ARP balancer bolt, and 6PK1930 gate belt.
knock sensor wiring harness
cam sensor, crankshaft sensor, oil pressure sensor
$1800 picked up but I'm willing to separate if you are interested in the short block
I also have some 243s and truck (intake with injectors, fuel rails, DBW throttle body, wiring harness, windage tray/pick up tube/oil pan, lifters/trays, pushrods, and oil pump that came with the LQ9)
Black ZR1s with the red lip wheels (56mm front 50mm back offsets), sumitomo tires, 17x9.5 with 275/40-ZR17 HTR ZII with some life left and 17x11 with 315/35-ZR17 HTR Z with one new tire and the other one 80% left. The wheels were originally black with the polished lip when I bought them from tomzwheels a while back. They are already balanced with new valve stems.
Magnaflow cat back with a cut out, the over the axle exhaust hanger broke off but can weld another one with no issues.
$250 picked up
MAC mid length headers and catted Y pipe (I gutted one cat but I never got around to gutting the second one), they are repainted with ceramic coating header paint. Perfect for a daily driver, the car made 423rwhp with this set up catted on a small cam LQ9.
$250 picked up
LS1 intake with EGR block off, fuel rails, 28lb injectors, MAP sensor, all the bolts and gaskets ready to install.
$275 picked up
317s with 140k
$250 heads picked up
$60 valve cover/gaskets/mounting bolts picked up
$60 rockers/stands picked up
134-3609 ARP head bolts pre 04 engines, used once, like new condition and ready to use.
$120 picked up
COMPLETE AC system with 50k miles: compressor/hoses, condenser, accumulator, high pressure line, new orifice tube, bracket with tensioner pulleys, Gates K040378 belt, and bolts ready to install.
$300 picked up
52487149 00-02 M6 radiator (60k) with hoses/clamps (30k) and electric fans (60k)
$100 Radiator/hoses/clamps picked up
$100 fans picked up
Alternator still working great (110k), 1 F-Body bracket with pulley, comes with 2 bolts.
$60 alternator picked up
$60 bracket/pulley/bolts picked up
PH-9189 F-Body water pump with hypertech 160* thermostat (50k), tensioner with pulley and all the bolts.
$100 water pump/thermostat/bolts picked up
$40 tensioner/pulley/bolts picked up