Parts: None (hopefully) Estimate time: 10 minutes per side. Tools Needed: Phillips Screwdriver, Loctite, Dielectric Silicon Preliminary Information: The mirrors are held to the adjusting motor by a small �+� shaped piece called a pinion. The pinion attaches to retainers on both mirror and motor. There are two threaded rods attached to the mirror, one […]

Meziere HD Coolant Pump Install for the LT-1/4 Let me begin with my situation before I started this upgrade. I have a 92 LT-1 convertible with the 6 speed tranny. I had an oil leak coming from the driven shaft seal of the water pump. After removal of the water pump I saw that it […]

Manual control of your cooling fans I have a 92 LT-1 convertible with the 6-speed transmission. I, also, have a Meziere HD electric water pump installed. This Tech Tip will explain how I installed switches that allow me to turn on the primary and secondary cooling fans. When the switches are turned off, the ECM […]

This tip provides additional information to the Tech Tip “FIXING YOUR C4 SPORT SEAT LUMBAR SUPPORT” authored by Bob Thibodeau on 6/15/2001. 1. An alternative source for material to replace the ruptured diaphragm is a bicycle inner tube. It is much thicker than the original diaphragm, and should provide longer “life”. To prepare the tube, […]

I thought I\’d share a \”How-To\” regarding an LT1 to LT4 instrument cluster R&R Here\’s what we\’re doing… From this To this Tools you\’ll need: – Torque wrench (in/lb) – Torx bit set – Phillips head screw driver – 7, 10, 15mm sockets w/ratchet – 6\” ratchet extension Before doing the job, it would be […]