I suggest measuring the \”trunk space\” prior to construction to verif fit, variances may be present amongst our hand built treasures. Their are two crusial dimentions. First, is the depth of the unit. It fits tightly behind the wheel well humps while allowing for use of luggage strap loops if they are to remain. Second […]

SLP Engineering makes an exhaust system called the Loudmouth, which is basically a rear section with no mufflers. While I like the idea, I really don\’t like the tips that come on it, and I also really didn\’t feel like spending $500+ for something I could build myself. So I decided to build my own […]

Most instruction manuals indicate that you should place the Master Cylinder in a vise and then use a dowel rod to press on the plunger to bleed the air out of the Master Cylinder. I found an easier way is to bleed the air out of the system backwards. Supplies: Fittings for bleeding hose (usually […]

My C5 recently was exhibiting hydraulic clutch problems. It was not releasing all the way causing hard shifting and grinding gears! I checked the fluid in the master cylinder and it was at the right level but it was dirty! It was dark gray and pieces of something were floating in it. After posting a […]