PAC ROEM-VET1 - switching from Clarion to Kenwood or Pioneer
#1
Miles of Smiles
Thread Starter
Member Since: Mar 2010
Location: Omaha Nebraska
Posts: 3,181
Received 540 Likes
on
365 Posts
2016 C5 of the Year Finalist
PAC ROEM-VET1 - switching from Clarion to Kenwood or Pioneer
Hey all,
Years ago I purchased/installed a Clarion NX501 with the PAC ROEM-VET1 from Double D Mods for my '02 Coupe.
The Clarion just died on me, and I'm looking at replacing it with either a Kenwood or Pioneer unit that supports Apple Carplay.
My question is, will I be able to re-use the PAC ROEM-VET1 that I already have, or will I need to replace that harness/adapter as well?
Thanks!
Years ago I purchased/installed a Clarion NX501 with the PAC ROEM-VET1 from Double D Mods for my '02 Coupe.
The Clarion just died on me, and I'm looking at replacing it with either a Kenwood or Pioneer unit that supports Apple Carplay.
My question is, will I be able to re-use the PAC ROEM-VET1 that I already have, or will I need to replace that harness/adapter as well?
Thanks!
Last edited by FrankLP; 05-21-2018 at 11:02 AM.
#2
Running Guns & Moonshine
I'm running it with my Avic-8200nex without issue.
I have an axxess xvsi 2004 which I had intended to use with the new head unit when I upgraded from a kenwood single din, but I tested the new one on the roem and it sounded fine so I left it.
I have an axxess xvsi 2004 which I had intended to use with the new head unit when I upgraded from a kenwood single din, but I tested the new one on the roem and it sounded fine so I left it.
#4
Running Guns & Moonshine
I did re-plice to work with the Pioneer wire harness, yes.
You might look and see if there is an aftermarket plug and play harness for what you have.
You might look and see if there is an aftermarket plug and play harness for what you have.