Pyle Backup camera problem
#1
Burning Brakes
Thread Starter
Member Since: Nov 2002
Location: Houston Texas
Posts: 1,025
Received 262 Likes
on
129 Posts
2024 Corvette of the Year Finalist - Modified
2023 C5 of the Year Winner - Modified
2023 Corvette of the Year Finalist (C8) - Modified
2023 Corvette of the Year Finalist (C6) - Modified
2022 C8 of the Year Winner - Modified
2022 C6 of the Year Winner - Modified
Pyle Backup camera problem
Hey guys, had front and rear cam installed along with my Alpine ilx 207 HU on my C6 manual Z. Problem I'm having is my backup lights stay on all the time. I checked the wiring connections at the rear of vehicle and the power seems to hooked up correctly with red wire from cam hooked to green wire going to backup light and the brown going to the black for ground Cam works fine just lights stay on with car on. Any ideas what else I can check? I have lost confidence in the shop that did install which is why I will not take my car back there. Thanks
The following users liked this post:
Gixxerman (05-28-2019)
#3
Burning Brakes
Thread Starter
Member Since: Nov 2002
Location: Houston Texas
Posts: 1,025
Received 262 Likes
on
129 Posts
2024 Corvette of the Year Finalist - Modified
2023 C5 of the Year Winner - Modified
2023 Corvette of the Year Finalist (C8) - Modified
2023 Corvette of the Year Finalist (C6) - Modified
2022 C8 of the Year Winner - Modified
2022 C6 of the Year Winner - Modified
I had the wife stand behind the car while I put it in and out of reverse and the lights work as they are supposed too. BONUS; the rear cam still activates even though I have disconnected (power) in the rear! So I don't know where/how its being powered BUT don't care at this moment because everything works properly!
#4
Le Mans Master
Member Since: Jan 2017
Location: Morris County New Jersey
Posts: 5,371
Received 1,636 Likes
on
1,121 Posts
I had the wife stand behind the car while I put it in and out of reverse and the lights work as they are supposed too. BONUS; the rear cam still activates even though I have disconnected (power) in the rear! So I don't know where/how its being powered BUT don't care at this moment because everything works properly!
#5
Burning Brakes
Thread Starter
Member Since: Nov 2002
Location: Houston Texas
Posts: 1,025
Received 262 Likes
on
129 Posts
2024 Corvette of the Year Finalist - Modified
2023 C5 of the Year Winner - Modified
2023 Corvette of the Year Finalist (C8) - Modified
2023 Corvette of the Year Finalist (C6) - Modified
2022 C8 of the Year Winner - Modified
2022 C6 of the Year Winner - Modified
Yes I am thinking the same. With the Alpine HU I had to buy their cam module adapter to be able to run 2 cameras which requires a power source a well. G2G now! Thx!