1/12 `67 Corvette Tri Power, This Time in White
#1
Pro
Thread Starter
1/12 `67 Corvette Tri Power, This Time in White
This one originally started out as the L-88 I was planning to build last year. Since then, I have had a customer request a white tri-power with a red stripe. So this is what you get.
Thanks again to everyone who has given me guidance over the years. Your comments and advice have really helped me improve a little bit with each build. If you notice, there is over spray on the manifolds, and two unpainted bolts on each valve cover. The tie rod ends are black. I have learned so much from you guys. I hope in some little way I can return the favor by posting the finished product.
Let me know what you think.
Thanks again to everyone who has given me guidance over the years. Your comments and advice have really helped me improve a little bit with each build. If you notice, there is over spray on the manifolds, and two unpainted bolts on each valve cover. The tie rod ends are black. I have learned so much from you guys. I hope in some little way I can return the favor by posting the finished product.
Let me know what you think.
#8
Race Director
Member Since: Jul 2000
Location: Out Where the Buses Don't Run, Eglin AFB/ Niceville FL
Posts: 15,250
Received 1,435 Likes
on
779 Posts
2022 Corvette of the Year Finalist -- Modified
2021 C6 of the Year Winner - Modified
Finalist 2020 C7 of the Year -- Modified
2020 C6 of the Year Finalist - Modified
A couple of those pics could pass for the 1:1 version. Awesome detail.
#11
Well done. Excellent build and photos to boot.
Thanks for sharing.
Thanks for sharing.
#12
Le Mans Master
Very nice work.