9-series Setrab STD Oil Cooler Complete Kit Lines fittings block adapter

Reply Subscribe

Thread Tools

Search this Thread

01-22-2013, 04:09 PM

0Xplosive Performance

Former Vendor

Thread Starter

Member Since: Feb 2010

Location: Longwood Florida

Posts: 28,247

Likes: 0

Received 32 Likes on 28 Posts

St. Jude Donor '13

9-series Setrab STD Oil Cooler Complete Kit Lines fittings block adapter

Everything you need to install a external oil cooler on your LS Series Engine.

All 1997 to present LS-Series engines (Gen III/IV) with rear-sump oil pans including LS1/LS6, LS2, LS3, LS7, L76/L92/L93, LQ4/LQ9, and LSX
NOT suitable for front-sump pans such as Pontiac GTO or Holden/Vauxhall Monaro oil pans

We have put together a package of all the parts you need to install an external oil cooler. No more hunting around to find fittings or hose or adapters.
These kit handles the cooling for 450-550HP

Kits Contains

(1) 9-series Setrab STD Oil Cooler 53,100-72,100 BTU's/Hr
(1) 9-Series Setrab Oil Cooler Mounting Bracket
(1) Low Profile Low-profile oil cooler adapter block
(2) Black Anodizied -10AN Adapter Fittings
(2) 22mm - 10AN Cooler Adapter Fittings
(3) -10 AN 90 Hose Ends
(1) -10 AN 120 Hose End
10 Ft High Temp Proflex Stainless Overbraid -10AN Hose
Please Note assembly of fittings to hoses/fittings to cooler are required.
For Preassembled hoses and fittings see Kit 3301
http://www.xplosiveperformance.com/S...rs_p_3258.html
$699.85

KIT 3301
KIT INCLUDES EVERYTHING YOU NEED.

(1) Setrab Oil Series 9 Cooler
(1) Oil Cooler Mounting Bracket
(2) M22 to AN-10 O ring oil cooler fittings
(3) AN-10 90 degree black fittings
(1) AN-10 120 degree black fitting
(1) Low-Profile Oil Cooler Adapter for LS-Series Engine
(2) Premade AN-10 Stainless Steel Overbraided lines with above fittings installed
All mounting screws and hardware.
Mounts in stock location on ZO6
Mounts in front of Condensor/Radiator

http://www.xplosiveperformance.com/9...AN_p_3301.html
$729.85

Reply Like

02-01-2013, 04:24 PM