C6 Corvette Fully Built Racecar
#1
C6 Corvette Fully Built Racecar
C6 Corvette fully built racecar for sale!
Will entertain possible trades for C6 Z06 Vette + cash. OR possible straight trade for your C7 Vette. Ever start thinking auto crossing your Z06 without a cage is a little dangerous? This is your chance to trade up to a fully built car with the most modern safety technology! Contact me today, lets make a deal!
- Donor Car is a 2006 steel frame chassis
- Complete SCCA legal roll cage with NASCAR style door bars on both sides
- Made from 1.75" x .120" DOM tubing
- Complete Carbon Fiber ACP World Challenge Body
- Lexan front and rear windows
- Penske double adjustable coilovers with custom made rod end mounts
- PFADT competition sway bars
- PFADT solid engine and differential mounts
- Custom made solid drive shaft couplers
- Zip "Ultimate differential" with Quaife torque biasing carrier, pinion cooling, 3.73 gear set
- Rockland Gear Close ratio "Transzilla" Transmission
- Coolers on both the transmission and differential
- AP Racing 6 Piston calipers on front with 14" 2 piece rotors, 20mm thick pads
- C6 Z06 rear caliper with 13.38" 2 piece rotors
- Custom made dual pass radiator
- Forgeline ZX3R 18" wheels
- Helmet Blower
- Cool Shirt sytem
- 10 pound fire system
- Kirkey Aluminum race seat
ENGINE
- LS2 with LS3 heads and intake
- GM LSX block
- Callies crankshaft | standard stroke
- Oliver rods
- Wiseco pistons | 12:1 compression
- LS3 heads with complete CNC done by Lingenfelter
- LS3 intake port matched by Lingenfelter
- Kooks Headers (Exit out side of car)
- ARE dry sump system
- 475 RWHP
Professional Quality, Race Ready
CONTACT: Robert Finlayson
Phone: 630-605-3797
E-Mail: RFinlayson@comcast.net
New Price Drop: $65,000
Will entertain possible trades for C6 Z06 Vette + cash. OR possible straight trade for your C7 Vette. Ever start thinking auto crossing your Z06 without a cage is a little dangerous? This is your chance to trade up to a fully built car with the most modern safety technology! Contact me today, lets make a deal!
- Donor Car is a 2006 steel frame chassis
- Complete SCCA legal roll cage with NASCAR style door bars on both sides
- Made from 1.75" x .120" DOM tubing
- Complete Carbon Fiber ACP World Challenge Body
- Lexan front and rear windows
- Penske double adjustable coilovers with custom made rod end mounts
- PFADT competition sway bars
- PFADT solid engine and differential mounts
- Custom made solid drive shaft couplers
- Zip "Ultimate differential" with Quaife torque biasing carrier, pinion cooling, 3.73 gear set
- Rockland Gear Close ratio "Transzilla" Transmission
- Coolers on both the transmission and differential
- AP Racing 6 Piston calipers on front with 14" 2 piece rotors, 20mm thick pads
- C6 Z06 rear caliper with 13.38" 2 piece rotors
- Custom made dual pass radiator
- Forgeline ZX3R 18" wheels
- Helmet Blower
- Cool Shirt sytem
- 10 pound fire system
- Kirkey Aluminum race seat
ENGINE
- LS2 with LS3 heads and intake
- GM LSX block
- Callies crankshaft | standard stroke
- Oliver rods
- Wiseco pistons | 12:1 compression
- LS3 heads with complete CNC done by Lingenfelter
- LS3 intake port matched by Lingenfelter
- Kooks Headers (Exit out side of car)
- ARE dry sump system
- 475 RWHP
Professional Quality, Race Ready
CONTACT: Robert Finlayson
Phone: 630-605-3797
E-Mail: RFinlayson@comcast.net
New Price Drop: $65,000
Last edited by DJFIN; 09-19-2018 at 02:41 PM. Reason: price change
The following users liked this post:
STANG KILLA SS (01-19-2018)
#15
GT2 class is growing fast. 29 cars entered at this years Runoffs, 4th largest class in SCCA Championships! Get in a class with some competition.
Contact me with any questions.
Robert Finlayson
Contact me with any questions.
Robert Finlayson