FS: SSR Comp H wheels C5Z sizes - lightweight
#1
Melting Slicks
Thread Starter
SSR Comp H wheels C5Z sizes - lightweight
For sale is a set of SSR Comp H lightweight wheels in C5Z sizes.
17x9.5" front offset 55 mm
18x10.5" rear offset 62 mm
Great set of wheels for track or autocross if not married to 18" fronts. Wheels have been sprayed by a previous owner with a light coat of flat black. Several nicks and scrapes from mounting tires, but no curb damage. The pictures showing the wheel spec stickers are of a friend's identical set of wheels, the stickers are gone from these wheels.
$500 plus shipping from 48150. Send a PM if you're interested.
Rear 1
Rear 2
Front 1
Front 2
Front width
Rear width
17x9.5" front offset 55 mm
18x10.5" rear offset 62 mm
Great set of wheels for track or autocross if not married to 18" fronts. Wheels have been sprayed by a previous owner with a light coat of flat black. Several nicks and scrapes from mounting tires, but no curb damage. The pictures showing the wheel spec stickers are of a friend's identical set of wheels, the stickers are gone from these wheels.
$500 plus shipping from 48150. Send a PM if you're interested.
Rear 1
Rear 2
Front 1
Front 2
Front width
Rear width
The following users liked this post:
69autoXr (11-28-2017)
#3
Melting Slicks
Thread Starter
I wish I could use them, but their offsets don't lend themselves to the tire sizes that I'm using these days, so these gotta go.
Last edited by 69autoXr; 11-28-2017 at 08:59 AM.
#6
Melting Slicks
Thread Starter
#8
Melting Slicks
Thread Starter
#9
Drifting
BTW, encase anyone is interested in those SSR are about 17.5lbs front and 21.5 lbs rear IIRC.
Here I am at Mid-Ohio with the second set still on the trailer waiting for the track to dry. Had a total of ten - two extra 9.5" rears for when the plan was to drop a LS1/T56 in the RX7. Those plans changed after I bought the '99 FRC.
GLWS!!
#11
Melting Slicks
Thread Starter
#12
Melting Slicks
Thread Starter
Sold!!!
Last edited by 69autoXr; 12-05-2017 at 10:57 AM.