FS: Brembo GT brakes
#1
Melting Slicks
Thread Starter
Member Since: Feb 2009
Location: Dallas Georgia
Posts: 2,787
Received 594 Likes
on
408 Posts
2020 Corvette of the Year Finalist (track prepared)
C3 of Year Winner (track prepared) 2019
Brembo GT brakes
I just picked up this car used so I have pretty much zero details on these brakes, other than they are for sale
$2,500 shipped with a box, maybe two, of new Cobalt pads.
What you see is what you get. Calipers, rotors, braided lines. I have only so much as driven the car around the block and everything seemed fine. This car was tracked with Chin at tracks around the country and I am not aware of there ever being a brake problem, ever.
$2,500 shipped with a box, maybe two, of new Cobalt pads.
What you see is what you get. Calipers, rotors, braided lines. I have only so much as driven the car around the block and everything seemed fine. This car was tracked with Chin at tracks around the country and I am not aware of there ever being a brake problem, ever.
Last edited by fleming23; 06-24-2019 at 07:43 AM.
#2
Melting Slicks
Thread Starter
Member Since: Feb 2009
Location: Dallas Georgia
Posts: 2,787
Received 594 Likes
on
408 Posts
2020 Corvette of the Year Finalist (track prepared)
C3 of Year Winner (track prepared) 2019
These are the 380mm front rotors at nearly 15”, so the ones you want if you are tracking hard!
I don’t think the thickness is of concern but I make no promises as I’m simply not familiar with this brake system.
I can’t find the minimum thickness anywhere on the rotor. It should be stamped but I did not locate the measurement due to some surface rust.
I don’t think the thickness is of concern but I make no promises as I’m simply not familiar with this brake system.
I can’t find the minimum thickness anywhere on the rotor. It should be stamped but I did not locate the measurement due to some surface rust.
#3
Melting Slicks
Thread Starter
Member Since: Feb 2009
Location: Dallas Georgia
Posts: 2,787
Received 594 Likes
on
408 Posts
2020 Corvette of the Year Finalist (track prepared)
C3 of Year Winner (track prepared) 2019
Someone make me an offer on these. I'm open to offers, knowing shipping eats into a large portion of the price.
Last edited by fleming23; 05-17-2019 at 11:00 AM.
#4
Drifting
Member Since: Jan 2003
Location: An armed society is a polite society!
Posts: 1,945
Received 34 Likes
on
26 Posts
Cruise-In IV Veteran
St. Jude Donor '10
Ive seen this kit in person and its exactly how Eric describes them. Outstanding BBK for a great price from a good seller. I can confirm the stock c6 base wheels will not clear the fronts for anyone curious on what wheel clears or not. I think the c6 z06 wheels will but did not have one on hand to try.
#6
Drifting
I sold the car to Eric and these are awesome brakes at a great price. In 2012, this brake package was $7500. I used Cobalt Friction XR1 (F) & XR2 (R) pads. I could out-brake just about every car on the track (red run group) with these brakes and never had a problem with them. The Brembo rotors last a long time and actually wear out as opposed to cracking.
I would put a "Buy" recommendation on these!
Cheers,
Jim
I would put a "Buy" recommendation on these!
Cheers,
Jim