Post your Race Parts 4 Sale HERE
#82
Burning Brakes
Member Since: Apr 2004
Location: Stanfield NC
Posts: 792
Likes: 0
Received 0 Likes
on
0 Posts
FS 2QT Accusump # 24-026 with EPC valve # 24-271 Good condition used one season. Gauge needs replaced as this one has a clouded face. $275.00 shipped to lower 48 Also Canton RR oil pan # 15-240+ came off an 88 C4 very good condition $275.00 shipped to lower 48. Thanks for looking. Price dropped to $250.00 for either, shipped to lower 48.
Canton RR pan=sold
Canton RR pan=sold
Last edited by WNDOPDLR; 04-23-2007 at 09:07 AM. Reason: update members
#83
Large Impressive Member
Member Since: Jul 2003
Location: Good health is merely the slowest possible rate at which one can die
Posts: 65,789
Received 68 Likes
on
34 Posts
St. Jude Donor '04-'05-'06-'07
FS 2QT Accusump # 24-026 with EPC valve # 24-271 Good condition used one season. Gauge needs replaced as this one has a clouded face. $275.00 shipped to lower 48 Also Canton RR oil pan # 15-240+ came off an 88 C4 very good condition $275.00 shipped to lower 48. Thanks for looking
#85
Racer
Member Since: Jun 2004
Location: Fairport Harbor OH
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
FS: Nitto 555 RIIs
SOLD SOLD SOLD
2 - 275/40-17 5/32s tread depth left - $50 ea.
2 - 305/35-18 4/32s tread depth left - $75 ea.
Or a reasonable offer
Email me if interested.
Thanks
2 - 275/40-17 5/32s tread depth left - $50 ea.
2 - 305/35-18 4/32s tread depth left - $75 ea.
Or a reasonable offer
Email me if interested.
Thanks
Last edited by Tim T; 01-21-2007 at 08:28 PM. Reason: tires sold
#88
WTB- Penske 8100's
I am looking for a used set of DA Penske 8100's for a C5 with leaf springs, stock length, any condition considered. I may also consider SA's.
Thanks, Scott
Thanks, Scott
#89
Advanced
Bell M3 Pro Helmet
New within last six months. Never used. Size 7 1/2. White with clear shield.
$500 including shipping
This is a full $70 cheaper than the lowest price I could find. Thanks!
$500 including shipping
This is a full $70 cheaper than the lowest price I could find. Thanks!
#90
Former Vendor
Member Since: Aug 2005
Location: Lewisville TX
Posts: 16,898
Received 406 Likes
on
300 Posts
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
quaife diff!
Hi Guys,
I have a 4.10 geared quaife diff for a C5, REMed, set up for the WC car, our tapped pinion nut for the mechanical diff pump setup, ect. This is an All out diff, no expense spared. Break in time only.
Asking 4500$.
Thanks
Anthony
I have a 4.10 geared quaife diff for a C5, REMed, set up for the WC car, our tapped pinion nut for the mechanical diff pump setup, ect. This is an All out diff, no expense spared. Break in time only.
Asking 4500$.
Thanks
Anthony
#91
Instructor
Member Since: Jan 2006
Location: North Tonawanda, New York
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
CI 7-8-9 Veteran
#92
FS:
4- 18x9.5 Black Wagon wheels with (2) 275/35/18 & (2) 305/35/18 Toyo RA1s mounted and balanced.
Great set of track wheels & tires for someone. Tires have alot of life left.
Located in Tyler, Tx and I'll be at The Driver's Edge event at MSR Cresson on Feb 3rd and 4th.
I can sell these for $490 for wheels and tires.
A ton of pictures can be found here:
http://smg.photobucket.com/albums/v2...age91/wheels2/
4- 18x9.5 Black Wagon wheels with (2) 275/35/18 & (2) 305/35/18 Toyo RA1s mounted and balanced.
Great set of track wheels & tires for someone. Tires have alot of life left.
Located in Tyler, Tx and I'll be at The Driver's Edge event at MSR Cresson on Feb 3rd and 4th.
I can sell these for $490 for wheels and tires.
A ton of pictures can be found here:
http://smg.photobucket.com/albums/v2...age91/wheels2/
#93
Stage III Barry Grant Carb
Have like new, older Barry Grant Stage III 750 CFM carb. This one is rated at approx. 950 cfm flow, has four corner idle circuits, dual accel. pumps etc. Air horn is milled off and all interior throat surfaces polished.
Ran it for one season and sold my race car.
Car comes off the corners HARD with this puppy.
Asking $500 and I'll pay shippping.
Contact me at: bbeckett5946@charter.net
RGDS
Bob
Ran it for one season and sold my race car.
Car comes off the corners HARD with this puppy.
Asking $500 and I'll pay shippping.
Contact me at: bbeckett5946@charter.net
RGDS
Bob
#94
Race Director
Member Since: May 2000
Location: No more yankee my wankee, the Donger is tired!
Posts: 17,101
Likes: 0
Received 1 Like
on
1 Post
Set of gauges
Tach - Stewart Warner #113018 70.00 plus shipping
Oil temp - Autometer Sport Comp #3348 140-300 degrees 20.00 plus shipping
Oil pressure - Accutech Radial Pro 100 PSI #46310 15.00 plus shipping
Coolant temp - Autometer Sport Comp #3337 100-250 degrees 20.00 plus shipping
Tach - Stewart Warner #113018 70.00 plus shipping
Oil temp - Autometer Sport Comp #3348 140-300 degrees 20.00 plus shipping
Oil pressure - Accutech Radial Pro 100 PSI #46310 15.00 plus shipping
Coolant temp - Autometer Sport Comp #3337 100-250 degrees 20.00 plus shipping
#95
Pro
Need to buy front spring
Need a front spring for a 1997 corvette. Mine was lowered on stock bolts when I bought it. I am going to have to raise it up for the sh!tty Oklahoma roads. When I tried to raise the right side bolt was locked down. Whe I finally got it to brake loose it is just turning inside the spring. SO the guys over on the C5 forum thought this was the place to find a used one since you guys often replace them. Dont really want to spend the $ on a new one.
#97
Hard Core Road Race & Autocross Clutch
I have a QuaterMaster triple disc clutch and hydraulic throw out bearing for sale.
Clutch is a 7 1/2 " unit with friction discs for a 26 spline input.
This unit bolts up with an auto trans flex plate (just used to start the engine) and has very low inertia. Engine accelerates very fast with this clutch and it will NOT slip.
Not a streetable item but if you want the ultimate in hook-up for your race application, this is it.
Clutch is used but very servicable (friction discs are over .100" thick)and comes with several extra floater and friction discs.
Will bolt up to older style small and big block Chevies.
$300 for the whole assembly and you pay shipping.
PM me if interested.
Bob Beckett
Clutch is a 7 1/2 " unit with friction discs for a 26 spline input.
This unit bolts up with an auto trans flex plate (just used to start the engine) and has very low inertia. Engine accelerates very fast with this clutch and it will NOT slip.
Not a streetable item but if you want the ultimate in hook-up for your race application, this is it.
Clutch is used but very servicable (friction discs are over .100" thick)and comes with several extra floater and friction discs.
Will bolt up to older style small and big block Chevies.
$300 for the whole assembly and you pay shipping.
PM me if interested.
Bob Beckett
#98
Drifting
Reposting these as the sale didn't make it:
I paid $400 for these, and realized that they would not fit as I want my seat to fit (in the car; they fit me fine). I'll sell them on for the same price. They are Forza II seats, in blue. Never installed or used.
http://www.corbeau.com/products/forza2/forza2.shtml
(link to Forza's catalog). Buyer pays shipping. They are still in their box, but it'll be pricy shipping as they are bulky. PM me if you're interested. I'll try to post pics where they can be seen. Location: Texas.
--Yak
I paid $400 for these, and realized that they would not fit as I want my seat to fit (in the car; they fit me fine). I'll sell them on for the same price. They are Forza II seats, in blue. Never installed or used.
http://www.corbeau.com/products/forza2/forza2.shtml
(link to Forza's catalog). Buyer pays shipping. They are still in their box, but it'll be pricy shipping as they are bulky. PM me if you're interested. I'll try to post pics where they can be seen. Location: Texas.
--Yak
#99
Drifting
C4 to C5 brake adapter kits.
We are running a special (GP) on our C4 to C5 brake adapter kits this week. Add C5 brakes to your C4 and get rid of that mushy feeling every time you step on the brakes at the track. Our kits include the adapter, bolts, instructions, and a complete easy to read parts list. Conversion time for the average person is about 2-3 hours.
85-87 MY kits on sale with free shipping for 115.00 this week!
http://forums.corvetteforum.com/show....php?t=1626372
88-96MY kits with free shipping are available for 125.00
http://forums.corvetteforum.com/show....php?t=1611445
85-87 MY kits on sale with free shipping for 115.00 this week!
http://forums.corvetteforum.com/show....php?t=1626372
88-96MY kits with free shipping are available for 125.00
http://forums.corvetteforum.com/show....php?t=1611445
#100
Le Mans Master
http://forums.corvetteforum.com/show....php?t=1630130
2002 C5 Coupe – ~51,000miles
MN6, Z51, 1SC (HUD, Sport Seats, dual-zone a/c)
Torch Red/Black
-Donaldson Blackwing Intake
-2-tip Borla Stinger exhaust
--I will also include the OEM intake and exhaust if you want
-Black Z06 Motorsport Wheels (18x9.5 front, 10x10.5 rear)
-Kumho Ecsta MX Tires (275/35-18 front, 295/35-18 rear) almost new, less than 1,500m
-Hurst Shifter http://www.lgmotorsports.com/catalog...oducts_id=1524
-Hardbar Harness bar http://hardbarusa.com/page_harness_bar.htm
-Vetteworks Lap belt mount (driver side only)http://www.vetteworksonline.com/cata...bbf1b4dc7a2722
-LG Motorsports G-Stop Brake Package http://www.lgmotorsports.com/catalog...oducts_id=1514
--Wilwood SL-6R front calipers (powder coated red)
--Wilwood SS brake lines
--LG Motorsports brackets and hardware
--ARP Wheel studs and CCW 5/8” spacer on front wheel to clear brakes
--OEM Z06 rear calipers
--Wilwood E-compound brake pads
-DRM Brake Ducts/LG Motorsports spindle ducts
-Speed bleeders on all calipers
-Phoenix Performance tow hooks (front not installed, but included)
-Draw-Tite Class I Frame receiver hitch/ Sports Frame Drawbar/ 1-7/8” hitch ball/ 4-poll wiring harness
-Included OEM front license plate cover and painted Kewl front license plate frame for those that have to run front plates
-Windows tinted 20%
-Service manual set
If it matters to you, this is what I've been using for the last few years.
Mobil 1 0w-40 engine oil
Royal Purple Transmission/differential/power steering fluid
ATE Superblue brake/clutch fluid
$27,000
click for full size more to follow
2002 C5 Coupe – ~51,000miles
MN6, Z51, 1SC (HUD, Sport Seats, dual-zone a/c)
Torch Red/Black
-Donaldson Blackwing Intake
-2-tip Borla Stinger exhaust
--I will also include the OEM intake and exhaust if you want
-Black Z06 Motorsport Wheels (18x9.5 front, 10x10.5 rear)
-Kumho Ecsta MX Tires (275/35-18 front, 295/35-18 rear) almost new, less than 1,500m
-Hurst Shifter http://www.lgmotorsports.com/catalog...oducts_id=1524
-Hardbar Harness bar http://hardbarusa.com/page_harness_bar.htm
-Vetteworks Lap belt mount (driver side only)http://www.vetteworksonline.com/cata...bbf1b4dc7a2722
-LG Motorsports G-Stop Brake Package http://www.lgmotorsports.com/catalog...oducts_id=1514
--Wilwood SL-6R front calipers (powder coated red)
--Wilwood SS brake lines
--LG Motorsports brackets and hardware
--ARP Wheel studs and CCW 5/8” spacer on front wheel to clear brakes
--OEM Z06 rear calipers
--Wilwood E-compound brake pads
-DRM Brake Ducts/LG Motorsports spindle ducts
-Speed bleeders on all calipers
-Phoenix Performance tow hooks (front not installed, but included)
-Draw-Tite Class I Frame receiver hitch/ Sports Frame Drawbar/ 1-7/8” hitch ball/ 4-poll wiring harness
-Included OEM front license plate cover and painted Kewl front license plate frame for those that have to run front plates
-Windows tinted 20%
-Service manual set
If it matters to you, this is what I've been using for the last few years.
Mobil 1 0w-40 engine oil
Royal Purple Transmission/differential/power steering fluid
ATE Superblue brake/clutch fluid
$27,000
click for full size more to follow
Last edited by Lancer033; 03-08-2007 at 08:47 AM.