Post your Race Parts 4 Sale HERE
04-21-2010, 07:36 PM
#1082
Have 2 sets of 18" CCW track wheels from my 2006 Z06. Both sets are 18" with 11" width in front and 13" in back. One is style C10 painted light gray and the other is C14 unpainted (kind of a rough shot peened finish). The C14s currently have a set of unused Goodyear racing slicks on them - I will sell with or without the tires. The tires are a little older but have worked fine for track days/practice laps etc once they get heated up. Prefer to sell locally if possible to avoid shipping hassle. I'm in Charlotte NC.
I checked the CCW website and a new set is roughly $2950. Asking $2000 per set or best offer without the tires. I have 2 sets of the Goodyear slicks and will throw them in for $500 a set or I will sell them separately. They are older but I've had them wrapped in brown plastic garbage bags in my basement since I got them. The wheels are round and balanced and are cosmetically in pretty good shape though I won't say perfect. They're plenty good for the track in any event. You can see the pictures. I didn't get a chance to clean them before snapping the shots. If you have any problems with the wheels I will take them back for full refund within 7 days of purchase (get your tires mounted/balanced asap).
Pictures can be seen here (though I neglected to snap one of the front C14s - there is no problem with it, just got distracted taking pics of these and a set of ford truck wheel/tires as well)...
http://s118.photobucket.com/albums/o111/jrz1/Wheels/
I checked the CCW website and a new set is roughly $2950. Asking $2000 per set or best offer without the tires. I have 2 sets of the Goodyear slicks and will throw them in for $500 a set or I will sell them separately. They are older but I've had them wrapped in brown plastic garbage bags in my basement since I got them. The wheels are round and balanced and are cosmetically in pretty good shape though I won't say perfect. They're plenty good for the track in any event. You can see the pictures. I didn't get a chance to clean them before snapping the shots. If you have any problems with the wheels I will take them back for full refund within 7 days of purchase (get your tires mounted/balanced asap).
Pictures can be seen here (though I neglected to snap one of the front C14s - there is no problem with it, just got distracted taking pics of these and a set of ford truck wheel/tires as well)...
http://s118.photobucket.com/albums/o111/jrz1/Wheels/
Last edited by jrz1; 04-25-2010 at 10:08 PM. Reason: More Info
04-21-2010, 08:39 PM
#1084
Burning Brakes
Member Since: Oct 2002
Location: Bay Area CA
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '08-'09-'10
Have 2 sets of CCW track wheels for 2006 Z06. One set has unused set of Goodyear racing slicks on them. They're a little older tires but probably good for practice. Want to say the wheels are 11" in front and 13" in rear but that might be off. I'm near Charlotte NC.
Will post pictures/specs soon.
Will post pictures/specs soon.
04-21-2010, 10:13 PM
#1085
Burning Brakes
Member Since: Nov 2006
Location: Goose Creek SC
Posts: 1,071
Likes: 0
Received 0 Likes
on
0 Posts
(4) Hoosier Road Race Slicks
I picked these up a while back for mach-up purposes. They are not corded, and have some good rubber left. They could be used on the track again, but admittedly are getting old.
Looking for $100 picked up (all 4) or $200 shipped (shipping is expensive)
I picked these up a while back for mach-up purposes. They are not corded, and have some good rubber left. They could be used on the track again, but admittedly are getting old.
Looking for $100 picked up (all 4) or $200 shipped (shipping is expensive)
04-22-2010, 02:09 AM
#1086
Racer
Member Since: Jun 2008
Location: Janesville WI
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, they are 315/35/17s (I fixed my original post).
They are at least 3 years old (when I purchased them used). If someone tells me what to look for I'll get the date code.
They are A6s.
Sale pending.
UPDATE SOLD
They are at least 3 years old (when I purchased them used). If someone tells me what to look for I'll get the date code.
They are A6s.
Sale pending.
UPDATE SOLD
Last edited by subtlez28; 04-22-2010 at 03:11 PM. Reason: SOLD
04-22-2010, 10:56 AM
#1088
Race Director
04-23-2010, 02:08 PM
#1089
Advanced
Member Since: Aug 2006
Location: Anderson Indiana
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
WTB Hoosier A6 in 275, 295, or 315 in 17's
Looking for some Hoosiers in 275, 295, or 315 in 17 inch. Kumho 710's would work also. Thanks
Vinash@aol.com
Vinash@aol.com
04-24-2010, 09:29 AM
#1092
Team Owner
Member Since: Jun 1999
Location: Miami bound
Posts: 71,447
Likes: 0
Received 4 Likes
on
4 Posts
CI 4-5-6-7 Veteran
RD Crossbar/Harness bar with camera mount for C5 Z06. The RD sticker is a little scratched up, but other wise perfect.
$200 plus shipping or can meet if you are anywhere near east TN.
PM or email jpireland at hotmail dot com
SOLD!
$200 plus shipping or can meet if you are anywhere near east TN.
PM or email jpireland at hotmail dot com
SOLD!
Last edited by Jason; 04-26-2010 at 07:00 AM.
04-24-2010, 11:48 AM
#1093
Drifting
Member Since: May 2004
Location: Coral Springs Fl
Posts: 1,783
Likes: 0
Received 0 Likes
on
0 Posts
I have a set of Stop Tech front rotors and calipers for a C5. Rotors are 2 piece and slotted, not drilled. Calipers are 4 piston. They come with a new set of stainless lines. Also have the pads. Ready to bolt right on. I would like to get $1500.00 but accepting offers. Please PM me, not reply in thread.
04-24-2010, 04:30 PM
#1094
Melting Slicks
FS: Schroth Clubman Racing harness NEW... today
2010.05.01.... SOLD !!!! (thanks Mike)
Here is a picture of it....
Here is a link to the Schroth site about the harness
schrothracing.com/store
I just purchased it and received it yesterday (2010.04.23).
It is BRAND NEW... I only opened the box to look at it.
Dated May 2010
SFI 16.1 Black, with CamLock, and B14 snaps (as opposed to B24 Bolt holes), and Pull-Down shoulder straps.
Note: the picture shows the crotch belts as having one side with the B14 snap, and the other side with the B24 bolt hole... this is merely for visual purposes.... my belt DOES have B14 snaps for BOTH the crotch sides.
I originally bought it because I was "over-zealous" in what I thought I needed.
But the real thing I want/need is merely a Lap belt, which has the LatchLink.
So I went and bought one locally.
So... this one is for sale.... Schroth new price is $199.
I'll take $175 including reasonable shipping (I paid $18.50 to get it to my US drop-off point (Point Roberts, Washington).
OK.... 2010.04.27.... I'll lower my price.... $150 shipped... or reasonable offer ?
2010.05.01.... SOLD !!!! (thanks Mike)
Here is a picture of it....
Here is a link to the Schroth site about the harness
schrothracing.com/store
I just purchased it and received it yesterday (2010.04.23).
It is BRAND NEW... I only opened the box to look at it.
Dated May 2010
SFI 16.1 Black, with CamLock, and B14 snaps (as opposed to B24 Bolt holes), and Pull-Down shoulder straps.
Note: the picture shows the crotch belts as having one side with the B14 snap, and the other side with the B24 bolt hole... this is merely for visual purposes.... my belt DOES have B14 snaps for BOTH the crotch sides.
I originally bought it because I was "over-zealous" in what I thought I needed.
But the real thing I want/need is merely a Lap belt, which has the LatchLink.
So I went and bought one locally.
So... this one is for sale.... Schroth new price is $199.
I'll take $175 including reasonable shipping (I paid $18.50 to get it to my US drop-off point (Point Roberts, Washington).
OK.... 2010.04.27.... I'll lower my price.... $150 shipped... or reasonable offer ?
2010.05.01.... SOLD !!!! (thanks Mike)
Last edited by NTMD8R; 05-02-2010 at 02:53 PM. Reason: Sold
04-26-2010, 07:45 PM
#1096
Race Director
FS: Brembo Drilled & Slotted rotors for C5 / C6 NEW
SOLD 
If you have ANY C5 corvette with the original brakes or a C6 (non-Z51, non-Z06, non-ZR1) with original brakes, then I have a great deal for you. About three years ago I picked up a set of Brembo drilled / slotted rotors in stock C5/C6 sizes. I put them away in my garage to use as replacements when needed - then I forgot I had them. I have now gone to a big brake kit, so I can't use these.
As you can see in the pictures, there is a TINY bit of surface rust on the braking surface, but that will be gone the first time you hit the brakes. These are brand new in the Brembo boxes.
$150 plus actual shipping - FIRM. No dibs - you pay, you get them.
As you can imagine, these are heavy, so keep that in mind. I will package them in one box - 69 lbs and ship via fedex ground from San Jose, CA 95134. Here are some example shipping costs...
Los Angeles - $30
Dallas - $57
Chicago - $67
New York City - $67
Miami - $67
I believe that anywhere on the East Coast would be $67, but you can check fedex.com to be sure.
If you have ANY C5 corvette with the original brakes or a C6 (non-Z51, non-Z06, non-ZR1) with original brakes, then I have a great deal for you. About three years ago I picked up a set of Brembo drilled / slotted rotors in stock C5/C6 sizes. I put them away in my garage to use as replacements when needed - then I forgot I had them. I have now gone to a big brake kit, so I can't use these.
As you can see in the pictures, there is a TINY bit of surface rust on the braking surface, but that will be gone the first time you hit the brakes. These are brand new in the Brembo boxes.
$150 plus actual shipping - FIRM. No dibs - you pay, you get them.
As you can imagine, these are heavy, so keep that in mind. I will package them in one box - 69 lbs and ship via fedex ground from San Jose, CA 95134. Here are some example shipping costs...
Los Angeles - $30
Dallas - $57
Chicago - $67
New York City - $67
Miami - $67
I believe that anywhere on the East Coast would be $67, but you can check fedex.com to be sure.
Last edited by doje; 04-26-2010 at 09:09 PM.
04-26-2010, 09:36 PM
#1098
I'm selling my "track package". These are GM polished wheels with center caps with Hoosier R6's mounted. The tires have 2 track days on them and 1 autocross event. The wheels also have the tire pressure sensors on them. The rotors have 1 track day. You get 2 sets of front pads, Hawk HP plus with plenty of track life left and the a set of Bendix CT.3 ceramic pads also with plenty of pad left. local pickup or will drive within 60 miles to meet or deliver. $2,000
PM or email jster17@bellsouth.net
PM or email jster17@bellsouth.net
04-27-2010, 09:22 PM
#1099
F/S Stoptech BBK ST60 Front Big Brake Kit
New Rotor Rings and hardware. New pads. Off of a 2008 C6Z06. Have an extra used rotor ring in very good condition. Includes stainless brake lines. Kit is complete. $ 2450.00
04-29-2010, 08:12 PM
#1100
Pro
Member Since: Mar 2010
Location: Seymour Tennessee (US129)
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
I HAVE A SET OF 2004 OEM THINSPOKE WHEELS (2-17'S AND 2-18'S) FOR THE C5 CORVETTE. THESE ARE THE "SPEEDLINE" WHEELS- NOT THE ALCOA'S. THESE ARE DIRECT GM WHEELS TAKEN OFF A 2004 C5 COUPE. THEY CAME GREY BUT WERE SANDED DOWN AND PAINTED ORANGE TO BE USED AS MY TRACK WHEELS. I RECENTLY BOUGHT A SET OF ZR1 WHEELS SO I NO LONGER NEED THESE. IT WOULD BE VERY SIMPLE TO SAND THESE DOWN AND PAINT ANY COLOR YOU WANT.
$300+ SHIPPING.
JUST BROKE THEM DOWN TODAY, ILL GET BETTER PICS TOMORROW. PM ME IF YOU MEED MORE PICS.
$300+ SHIPPING.
JUST BROKE THEM DOWN TODAY, ILL GET BETTER PICS TOMORROW. PM ME IF YOU MEED MORE PICS.