Post your Race Parts 4 Sale HERE
#1882
Racer
Member Since: Feb 2001
Location: Palatine IL
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
St. Jude Donor '12
Gone C5, new GS = Parts for Sale
C5 Gone, WTS Stuff Near Chicago
Prices do not include shipping and packaging! Pics will be available, likely on imageshack.com if they are still around.
Front and Rear Z06 size wheels with oversize tires. Wheels are Factory Reproductions, 17X9.5 and 18X 10.5. Black with polished aluminum rims an perimeter billets. Prefer not to separate from tires described next. You are ready to race if you buy this wheel and tire pkg. $800, reduced from $1,000. - Pics at http://img219.imageshack.us/g/c54salestuff016.jpg/
Tires are Kumho Ecsta MX, 285/40R-17 101Y in front. 295/35R-18 99Y rear.
Simpson 5-pt Harness in black, manual lock, not "cam Lock". $75, reduced from $100
2 Sets of OEM brake lines. TBD, as I am putting a parts thread together...
Brake pads, ...
Here's what I have. A front set of Performance Friction Z-rated that are brand new, and a second front set that are 50%. $60 for the new set and $30 for the partially used set, or both for $80. You now need to buy both set for $80, will not separate.I also have a complete set of EBC Red Stuff, front and rear, that are 2/3. $85 for the complete set.
OEM Glass Roof for C5 Coupe...$500 firm, reduced from $600, one 1/2" minor scratch toward rear lock, almost like new and all seals are perfect.
Pics at http://img263.imageshack.us/g/c54salestuff025.jpg/
OEM Brake lines - 2 sets, will be part of miscellaneous parts post
OEM High & Low Headlight bulbs - make an offer
New Oil Filters - 1 UPF 44 Delco $6 and 2 K&N HP-1007 $9
2004 C5 Instructional CD new in the wrapper - make me an offer
2000 C5 Instructional in VHS, viewed twice...same as above
OEM Oil pan drain plugs - part of miscellaneous parts thread to follow
OEM stock sway bars - make me an offer...
More minor stuff will be posted later.
Prices do not include shipping and packaging! Pics will be available, likely on imageshack.com if they are still around.
Front and Rear Z06 size wheels with oversize tires. Wheels are Factory Reproductions, 17X9.5 and 18X 10.5. Black with polished aluminum rims an perimeter billets. Prefer not to separate from tires described next. You are ready to race if you buy this wheel and tire pkg. $800, reduced from $1,000. - Pics at http://img219.imageshack.us/g/c54salestuff016.jpg/
Tires are Kumho Ecsta MX, 285/40R-17 101Y in front. 295/35R-18 99Y rear.
Simpson 5-pt Harness in black, manual lock, not "cam Lock". $75, reduced from $100
2 Sets of OEM brake lines. TBD, as I am putting a parts thread together...
Brake pads, ...
Here's what I have. A front set of Performance Friction Z-rated that are brand new, and a second front set that are 50%. $60 for the new set and $30 for the partially used set, or both for $80. You now need to buy both set for $80, will not separate.I also have a complete set of EBC Red Stuff, front and rear, that are 2/3. $85 for the complete set.
OEM Glass Roof for C5 Coupe...$500 firm, reduced from $600, one 1/2" minor scratch toward rear lock, almost like new and all seals are perfect.
Pics at http://img263.imageshack.us/g/c54salestuff025.jpg/
OEM Brake lines - 2 sets, will be part of miscellaneous parts post
OEM High & Low Headlight bulbs - make an offer
New Oil Filters - 1 UPF 44 Delco $6 and 2 K&N HP-1007 $9
2004 C5 Instructional CD new in the wrapper - make me an offer
2000 C5 Instructional in VHS, viewed twice...same as above
OEM Oil pan drain plugs - part of miscellaneous parts thread to follow
OEM stock sway bars - make me an offer...
More minor stuff will be posted later.
#1883
For sale, OMP seats, sparco 6pt. harness, AFE intake, CCW wheels 17x11 17x12 w/kumho v700 tires, hardbar harness bar (pending).
http://forums.corvetteforum.com/c5-p...omp-seats.html
http://forums.corvetteforum.com/c5-p...700-tires.html
http://forums.corvetteforum.com/c5-p...omp-seats.html
http://forums.corvetteforum.com/c5-p...700-tires.html
#1884
Safety Car
Selling off the last of my GT-1 race car stuff
Alcon Brakes and 4 Carbon/graphite rotors and 4 steel rotors all with hats. None of this stuff will fit without some fabrication of brackets and redrilling the hats (5 x 5 bolt pattern currently). The carbon/graphite rotors weigh only 6lbs. 12.125 x 1.25 Should fit in any wheel 15" or larger. When these get hot, you can stop time. $3000 Please PM if interested. Pick up in Central NJ only.
Last edited by parkerracing; 07-10-2011 at 08:12 AM.
#1885
Safety Car
Selling off the last of my GT-1 race car stuff
Pit Box 7' x 6' x 3' holds 3 nitrogen bottles, tool box mounts in end (neither included), trickle charger, interior lights, 110v plug. Built by NE ARCA team. $1200 obo. Please PM if interested. Pick up in Central NJ only.
Last edited by parkerracing; 07-10-2011 at 08:11 AM.
#1888
Safety Car
Selling off the last of my GT-1 race car stuff
10' x 20' Pit master awning (attaches to side of trailer) red/white stripes, all hardware. $250 Pick up in Central NJ.
This...
Builds...
This...
Attaches to the side of the trailer with 3 down tubes for support (all hardware included).
This...
Builds...
This...
Attaches to the side of the trailer with 3 down tubes for support (all hardware included).
Last edited by parkerracing; 07-14-2011 at 07:21 AM.
#1889
Safety Car
Selling off the last of my GT-1 race car stuff
Rare Corvette Challenge Paperwork from SCCA and John Powell, Inc. (never filled out). Own this rare piece of Corvette racing history. Perfect for Challenge car owners or fans. $100 plus postage (car NOT included).
#1890
Safety Car
Selling off the last of my GT-1 race car stuff
Misc. bits and pieces. All prices plus shipping.
Aluminum air box with 14" top (no filter) $25
Carbon fiber air duct 16" x 7" at widest points weighs next to nothing $30
Duel inlet duct 12" x 6.75" OA $15
Aluminum air box with 14" top (no filter) $25
Carbon fiber air duct 16" x 7" at widest points weighs next to nothing $30
Duel inlet duct 12" x 6.75" OA $15
Last edited by parkerracing; 08-07-2011 at 02:42 PM.
#1891
Safety Car
Selling off the last of my GT-1 race car stuff
Misc. part cont....Please PM. Price plus shipping,
Autolite spark plugs (box of 10) $20
NKG Spark plugs 2 boxes of 4 $20
Transmission crossmember for tube frame car (mount to chassis needs to be fabricated) $10
Steel trans mount $20
Lot of carb spacers/gaskets. 1 4 hole spacer, 7 gaskets, one steel plate. $50
Holley primary throtle rod. Cams reprofiled for faster response. Factory piece but I cannot find a pn. $20
Holley throtle rod (I believe this is for the secondaries?) $20
C2-3 camber block lowers strut rod 3/8" for better geometry through corners. Comes with grade 8 hardware. $49
Autolite spark plugs (box of 10) $20
NKG Spark plugs 2 boxes of 4 $20
Transmission crossmember for tube frame car (mount to chassis needs to be fabricated) $10
Steel trans mount $20
Lot of carb spacers/gaskets. 1 4 hole spacer, 7 gaskets, one steel plate. $50
Holley primary throtle rod. Cams reprofiled for faster response. Factory piece but I cannot find a pn. $20
Holley throtle rod (I believe this is for the secondaries?) $20
C2-3 camber block lowers strut rod 3/8" for better geometry through corners. Comes with grade 8 hardware. $49
#1892
Burning Brakes
Brey Krause Lap Belt Mount Kit for 1997-2004 Corvette C5
Brey Krause Lap Belt Mount Kit for 1997-2004 Corvette C5
Driver Side Only
Part# R-9115
SOLD
Driver Side Only
Part# R-9115
SOLD
Last edited by JSTAN; 07-18-2011 at 06:45 AM.
#1894
Racer
Member Since: May 2010
Location: Washington DC
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Candidates for a set of track wheels. OEM Speedline Y2k thinspokes
http://forums.corvetteforum.com/c5-p...post1578096572
http://forums.corvetteforum.com/c5-p...post1578096572
#1895
Clearing garage-Good race parts for sale
*Ford 9" refreshed by unitrax:
This pumpkin is recently refreshed with a new WAVETRAC($995.00) LSD from UNITRAX.
FOMOCO 3:50 gears with new Timken bearings and seals. It is a 31 spline with 3.062 bearing and billet 1350 yoke(separate.)
The WAVETRAC has a limited lifetime warranty with this unit. The LSD has only 2 days of testing at WSIR on her. What is unique about this unit is it has a preload so if a wheel unloads, it does not become an open diff.
$1050.00[/B]
*Ford 9" refreshed by Bill Thomas:
This pumkin was refreshed with new Timken bearings and seals. 3:25 US Gears with Strange full spool\, 31 spline with 3.062 bearing and 1330 long yoke. Used 1 race weekend at Fontucky.
$475.00
*GM Vortec ZZ4 Top end: assembled ZZ4 Heads with 1 year old valve job by Van Gordon with brand new valve springs currently, GM Vortec Intake Manifold.
$500.00 I'll throw in the pushrods, rocker arms and fasteners for free!
*GM ZZ4 roller cam.
$50.00
Thanx-Ed
Email for pix or other info
onfireiii@verizon.net
This pumpkin is recently refreshed with a new WAVETRAC($995.00) LSD from UNITRAX.
FOMOCO 3:50 gears with new Timken bearings and seals. It is a 31 spline with 3.062 bearing and billet 1350 yoke(separate.)
The WAVETRAC has a limited lifetime warranty with this unit. The LSD has only 2 days of testing at WSIR on her. What is unique about this unit is it has a preload so if a wheel unloads, it does not become an open diff.
$1050.00[/B]
*Ford 9" refreshed by Bill Thomas:
This pumkin was refreshed with new Timken bearings and seals. 3:25 US Gears with Strange full spool\, 31 spline with 3.062 bearing and 1330 long yoke. Used 1 race weekend at Fontucky.
$475.00
*GM Vortec ZZ4 Top end: assembled ZZ4 Heads with 1 year old valve job by Van Gordon with brand new valve springs currently, GM Vortec Intake Manifold.
$500.00 I'll throw in the pushrods, rocker arms and fasteners for free!
*GM ZZ4 roller cam.
$50.00
Thanx-Ed
Email for pix or other info
onfireiii@verizon.net
#1896
Burning Brakes
For Sale (2) 17x9.5 OEM 2001 Alcoa Z06 Wheels
For Sale (2) 17x9.5 OEM 2001 Alcoa Z06 Wheels
Some curb rash.
SOLD
Some curb rash.
SOLD
Last edited by JSTAN; 07-18-2011 at 06:45 AM.
#1897
Burning Brakes
FS: LS3 "Bat-wing" Oil Pan
GM Performance Parts P/N: 12630477 (aka: the "Bat-wing", due to its shape).
Intended for the base 2008+ C6 LS3 motor without dry sump (ie: not intended for Z06 or Grand Sport). The increased volume and superior sump baffling in place vs. the factory oil pan helps to prevent oil starvation under sustained, high g-force cornering.
If you take your car LS3 equipped car onto a road course, you may be risking engine damage. This oil pan is GM's answer to the problem, without going to the higher cost and more elaborate dry-sump system. It will also work for any '05 - '07 C6 LS2.
I ran several track days (at Mosport, which is responsible for the death of even a couple LS7's) with my 2010 C6 without any issues or concerns using this pan (and put over 12k miles on the engine), but have since upgraded to a Z06.
New from GM, this pan lists for approx. ~$1500. Bought last year from a fellow forum member for $800. Would like to see the same ($800).
For more info, PM or phone: 9 0 5 - 2 5 9 - 8 8 7 5
Intended for the base 2008+ C6 LS3 motor without dry sump (ie: not intended for Z06 or Grand Sport). The increased volume and superior sump baffling in place vs. the factory oil pan helps to prevent oil starvation under sustained, high g-force cornering.
If you take your car LS3 equipped car onto a road course, you may be risking engine damage. This oil pan is GM's answer to the problem, without going to the higher cost and more elaborate dry-sump system. It will also work for any '05 - '07 C6 LS2.
I ran several track days (at Mosport, which is responsible for the death of even a couple LS7's) with my 2010 C6 without any issues or concerns using this pan (and put over 12k miles on the engine), but have since upgraded to a Z06.
New from GM, this pan lists for approx. ~$1500. Bought last year from a fellow forum member for $800. Would like to see the same ($800).
For more info, PM or phone: 9 0 5 - 2 5 9 - 8 8 7 5
#1898
GM Performance Parts P/N: 12630477 (aka: the "Bat-wing", due to its shape).
Intended for the base 2008+ C6 LS3 motor without dry sump (ie: not intended for Z06 or Grand Sport). The increased volume and superior sump baffling in place vs. the factory oil pan helps to prevent oil starvation under sustained, high g-force cornering.
If you take your car LS3 equipped car onto a road course, you may be risking engine damage. This oil pan is GM's answer to the problem, without going to the higher cost and more elaborate dry-sump system. It will also work for any '05 - '07 C6 LS2.
I ran several track days (at Mosport, which is responsible for the death of even a couple LS7's) with my 2010 C6 without any issues or concerns using this pan (and put over 12k miles on the engine), but have since upgraded to a Z06.
New from GM, this pan lists for approx. ~$1500. Bought last year from a fellow forum member for $800. Would like to see the same ($800).
For more info, PM or phone: 9 0 5 - 2 5 9 - 8 8 7 5
Intended for the base 2008+ C6 LS3 motor without dry sump (ie: not intended for Z06 or Grand Sport). The increased volume and superior sump baffling in place vs. the factory oil pan helps to prevent oil starvation under sustained, high g-force cornering.
If you take your car LS3 equipped car onto a road course, you may be risking engine damage. This oil pan is GM's answer to the problem, without going to the higher cost and more elaborate dry-sump system. It will also work for any '05 - '07 C6 LS2.
I ran several track days (at Mosport, which is responsible for the death of even a couple LS7's) with my 2010 C6 without any issues or concerns using this pan (and put over 12k miles on the engine), but have since upgraded to a Z06.
New from GM, this pan lists for approx. ~$1500. Bought last year from a fellow forum member for $800. Would like to see the same ($800).
For more info, PM or phone: 9 0 5 - 2 5 9 - 8 8 7 5
Will this fit with LG long tube headers?
#1899
Drifting
FS: T1 sway bars
Front bsr
Two rear bars 1 old style single hole, and 1 new style 3 hole
1 set of new end links
good bushings on bars, and new sets of both frt and Rr bushings
New cost from gmpartsdirect is about $650
sell for $400 plus shipping or pick up in Scranton PA area.
Two rear bars 1 old style single hole, and 1 new style 3 hole
1 set of new end links
good bushings on bars, and new sets of both frt and Rr bushings
New cost from gmpartsdirect is about $650
sell for $400 plus shipping or pick up in Scranton PA area.
Last edited by db2xpert; 07-14-2011 at 11:50 PM.
#1900
Drifting
Hardbar Harness Bar
Hardbar Harness Bar for C6 or C6Z in perfect condition. $200.00 plus shipping - (Panels are SOLD) PM if interested.
Last edited by BERETTA; 11-29-2011 at 11:54 AM. Reason: Price change