For sale/trade, C6 WC body, RMP tranny and diff, Tilton pedals, race clutch, etc.
12-27-2009, 03:02 PM
#1
Former Vendor
Thread Starter
For sale/trade, C6 WC body, RMP tranny and diff, Tilton pedals, race clutch, etc.
-----------------
C6 Z06 World Challenge body, mostly in fiberglass as $10k less than the same thing in CF. I was told these are around $18k now.
brand new, $11,995 plus shipping OBO OBO OBO
These can be fitted to a C5 chassis.
In fiberglass except under tray, wing element which are CF, includes full tub, front fender liners, brake ducts, etc...... just the doors and sills are gutted stock C6, the rest is full on race body.
If this does not sell it may become part of a pretty outrageous street car
-------------------
SOLD, Woodward steering column, etc, Tilton 3-way pedals, MC, etc, Clutch Masters dual disk, 5.25 clutch
Still for sale, C5/6 lexan windsheild, brand new, $350 OBO
-------
C5 parts for sale:
Rear fastback lexan, brand new, $350
Fastback hatch, no window, $150
upper tub, brand new, $200
targa bar cover, new but cracked and fixed, $100
rear fenders, $100 each
rear bumper, not mint, $100
Tubbed rear tub, not quite finished but the hard stuff is done, pick up only, $150
Gutted targa top, $50 ( I was going to bond the top to the targa bar cover for cleaner airflow, less weight)
-----------------
All parts OBO, reasonable that is
I have pics of most everything, email me if you need them please.
rick@raamaudio.com
801-829-4997
I accept Paypal and all CC and Debit cards
C6 Z06 World Challenge body, mostly in fiberglass as $10k less than the same thing in CF. I was told these are around $18k now.
brand new, $11,995 plus shipping OBO OBO OBO
These can be fitted to a C5 chassis.
In fiberglass except under tray, wing element which are CF, includes full tub, front fender liners, brake ducts, etc...... just the doors and sills are gutted stock C6, the rest is full on race body.
If this does not sell it may become part of a pretty outrageous street car
-------------------
SOLD, Woodward steering column, etc, Tilton 3-way pedals, MC, etc, Clutch Masters dual disk, 5.25 clutch
Still for sale, C5/6 lexan windsheild, brand new, $350 OBO
-------
C5 parts for sale:
Rear fastback lexan, brand new, $350
Fastback hatch, no window, $150
upper tub, brand new, $200
targa bar cover, new but cracked and fixed, $100
rear fenders, $100 each
rear bumper, not mint, $100
Tubbed rear tub, not quite finished but the hard stuff is done, pick up only, $150
Gutted targa top, $50 ( I was going to bond the top to the targa bar cover for cleaner airflow, less weight)
-----------------
All parts OBO, reasonable that is
I have pics of most everything, email me if you need them please.
rick@raamaudio.com
801-829-4997
I accept Paypal and all CC and Debit cards
Last edited by RAAMaudio; 02-12-2010 at 11:55 AM.
12-27-2009, 03:06 PM
#3
Former Vendor
Thread Starter
RPM built tranny, fully polished internals, custom 5th and 6th gear ratio, internal cooler pump, etc....... $3999 OBO never installed!
RPM diff, Quaffe LSD, etc.....just like Aaron ran in his C5 NASA championship car except internal cooler pump added to this one, stock ratio that RPM can swap for a very reasonable price if needed, never installed either, $2999 OBO
RPM diff, Quaffe LSD, etc.....just like Aaron ran in his C5 NASA championship car except internal cooler pump added to this one, stock ratio that RPM can swap for a very reasonable price if needed, never installed either, $2999 OBO
Last edited by RAAMaudio; 02-12-2010 at 08:41 PM.
12-27-2009, 03:09 PM
#4
Former Vendor
Thread Starter
Not yet, I was posting it when you posted
I did not look up all the prices again so may adjust it a bit, maybe not depending on what it should realistically be priced at.
I will have to look to see how much effort to install since I now have a full steel firewall in my chassis but I may be interested in a partial trade for stock stuff.
Thanks
Rick
I did not look up all the prices again so may adjust it a bit, maybe not depending on what it should realistically be priced at.
I will have to look to see how much effort to install since I now have a full steel firewall in my chassis but I may be interested in a partial trade for stock stuff.
Thanks
Rick
01-14-2010, 09:46 PM
#6
Former Vendor
Thread Starter
SOLD and shipped, Woodward column, Tilton 3-way pedals, etc....Clutch Masters 5.25 dual disk clutch, billet TOB,
Rick
Rick
Last edited by RAAMaudio; 02-12-2010 at 11:56 AM.
01-31-2010, 11:37 PM
#7
Former Vendor
Member Since: Aug 2008
Location: Murfreesboro TN.
Posts: 2,168
Likes: 0
Received 0 Likes
on
0 Posts
I just do not have the time, energy, or desire to continue building the race car. I tried to get back into it but just not going to happen and taking up space here so need to let this stuff go. (though I am going to build some kind of killer street rod out of the chassis over the next few years
-----------------
C6 Z06 World Challenge body, mostly in fiberglass as $10k less than the same thing in CF. I was told these are around $18k now.
brand new, $11,995 plus shipping.
These can be fitted to a C5 chassis.
In fiberglass except under tray, wing element which are CF, includes full tub, front fender liners, brake ducts, etc...... just the doors and sills are gutted stock C6, the rest is full on race body.
If this does not sell it may become part of a pretty outrageous street car
-------------------
Woodward steering column, etc, SOLD and shipped
Tilton 3-way pedals, MC, etc, SOLD and shipped
Clutch Masters dual disk, 5.25 clutch, flywheel, billet TOB, ARP bolts, etc... $999 OBO (rally spec clutch, not quite an on/off switch, same setup Arron had in his C5 NASA championship car)
C5/6 lexan windsheild, brand new, $350 OBO
-------
C5 parts for sale:
Rear fastback lexan, brand new, $350
Fastback hatch, no window, $150
upper tub, brand new, $200
targa bar cover, new but cracked and fixed, $100
rear fenders, $100 each
rear bumper, not mint, $100
Tubbed rear tub, not quite finished but the hard stuff is done, pick up only, $150
Gutted targa top, $50 ( I was going to bond the top to the targa bar cover for cleaner airflow, less weight)
-----------------
All parts OBO, reasonable that is
I have pics of most everything, email me if you need them please.
rick@raamaudio.com
801-829-4997
I accept Paypal and all CC and Debit cards
-----------------
C6 Z06 World Challenge body, mostly in fiberglass as $10k less than the same thing in CF. I was told these are around $18k now.
brand new, $11,995 plus shipping.
These can be fitted to a C5 chassis.
In fiberglass except under tray, wing element which are CF, includes full tub, front fender liners, brake ducts, etc...... just the doors and sills are gutted stock C6, the rest is full on race body.
If this does not sell it may become part of a pretty outrageous street car
-------------------
Woodward steering column, etc, SOLD and shipped
Tilton 3-way pedals, MC, etc, SOLD and shipped
Clutch Masters dual disk, 5.25 clutch, flywheel, billet TOB, ARP bolts, etc... $999 OBO (rally spec clutch, not quite an on/off switch, same setup Arron had in his C5 NASA championship car)
C5/6 lexan windsheild, brand new, $350 OBO
-------
C5 parts for sale:
Rear fastback lexan, brand new, $350
Fastback hatch, no window, $150
upper tub, brand new, $200
targa bar cover, new but cracked and fixed, $100
rear fenders, $100 each
rear bumper, not mint, $100
Tubbed rear tub, not quite finished but the hard stuff is done, pick up only, $150
Gutted targa top, $50 ( I was going to bond the top to the targa bar cover for cleaner airflow, less weight)
-----------------
All parts OBO, reasonable that is
I have pics of most everything, email me if you need them please.
rick@raamaudio.com
801-829-4997
I accept Paypal and all CC and Debit cards
