c6, WHICH FRONT BRAKE COOLING KIT.. DRM, QUANTUM, ETC
#1
Instructor
Thread Starter
Member Since: Oct 2011
Location: ELK GROVE CA
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
c6, WHICH FRONT BRAKE COOLING KIT.. DRM, QUANTUM, ETC
I have a C6 that I use for fun and for track days. After my last day at Laguna Seca, I really need something to cool my brakes down. After looking at several kits online, I wanted to find out what is best for VALUE, EASE of INSTALL and COOLING.
Thanks for your feedback.
Jason
Thanks for your feedback.
Jason
#2
This
http://www.lapponline.com/index.php?...0783abfe0e3874
and
http://www.lapponline.com/index.php?...roducts_id=217
and
3 inch hose to connect the two above.
http://www.lapponline.com/index.php?...0783abfe0e3874
and
http://www.lapponline.com/index.php?...roducts_id=217
and
3 inch hose to connect the two above.
#4
Is Lambert still around? I havent seen updates in a while. Last I had heard (December last year) they were working on a very interesting sway bar kit that never made it to market.
#5
Racer
I have a C6 that I use for fun and for track days. After my last day at Laguna Seca, I really need something to cool my brakes down. After looking at several kits online, I wanted to find out what is best for VALUE, EASE of INSTALL and COOLING.
Thanks for your feedback.
Jason
Thanks for your feedback.
Jason
http://forums.corvetteforum.com/auto...ase-coupe.html
I wish I had rear spindel ducts on my car. My rear pads seem to be wearing faster than the front and the dust boots are burnt up on the calipers and tie rod end ball joints.
Cheapest route is most likely EBAY, but I like supporting the racing community.
#6
Drifting
This
http://www.lapponline.com/index.php?...0783abfe0e3874
and
http://www.lapponline.com/index.php?...roducts_id=217
and
3 inch hose to connect the two above.
http://www.lapponline.com/index.php?...0783abfe0e3874
and
http://www.lapponline.com/index.php?...roducts_id=217
and
3 inch hose to connect the two above.
#7
Racer
theVcar take a look at some of these pics I took and see if they help any.
http://forums.corvetteforum.com/album.php?albumid=26128
http://forums.corvetteforum.com/album.php?albumid=26128
#8
Tech Contributor
#10
Former Vendor
Member Since: Mar 2007
Location: Highland IN
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Still working on and testing the sway bar kit. Should be an interesting spring...
#11
Congratulations!
its good to know the company is still around... cant wait to see how the sway bars turn out!
Last edited by el es tu; 02-03-2013 at 12:53 PM.