Sebring27

Hi,
Looking for a C5 front splitter for my track car. Anyone know of any suppliers?
Look forward to any advice or contacts.
Thanks in advance

Olitho

Jim Tway just designed a new one. I am in the process of ordering one. It is stronger and lighter than most of the other ones I have seen.

Sebring27

Thanks appreciated!

z06801

Any info on this? pictures? ordering info

RadnessWarrior

Check out this company. Tegris is used for NASCAR splitters.

http://powerstreamindustries.com/tegris.asp

Sebring27

Thanks !

mgarfias

Pix or it didn't happen.

yakisoba

I made my own. Material research ongoing, but for something that projects less than three inches, polymetal works pretty well. Tegris is super for making skid plates but you can make those out of Jabroc if you are saving money.

Z06Tracker

Check out pics in post 81-83 in this tread.

http://forums.corvetteforum.com/auto...6-build-5.html

skxf430

I believe Aeromotions makes a splitter for the GTR's out of this material and it has held up really well compared with carbon fiber. Not quite as light but a lot more durable.

jimtway

Yes, we made a one piece design, carbon and foam core construction to mate the World Challenge front end. We also have a flat design construction to mate up to the flat bottom designs like the Blackdog or any other aftermarket bumper out there.

It was stiff enough, that it didn't require any external splitter supports. I ran it up to 150mph two straight days at Auto Club Speedway. I used turnbuckles (Five Star Bodies) internally attached off the chassis to mount it.

Shown here is a 4" overhang ST-2 design. We can make a 2" design for those who want to run T-1 or GT-2.


If your interested in ordering or have more questions, just send me a pm.

jimtway

Here's a good shot at speed:

Sebring27

Many thanks ! Much appreciated

VGLNTE1

Everyone loves my idea

VGLNTE1

http://forums.corvetteforum.com/auto...-splitter.html