When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just got 4 sets in today. These are direct bolt-on replacement lower mounts for the front shock Koni 3013-1023Sport on the C5/C6. I don't keep these in stock all the time, get them in small batches and in fact some already are gone from this run (leaving 4 sets).
A few reasons for these.
1. More durable. Over time the stock bushing moves around and in some cases has actually popped out of the shock eye.
2. Shocks are easier to adjust. These allow both adjusters to face the same direction (to the front) so the rebound can be changed quickly and more easily with the car on some ramps... no need to take a wheel off, etc.
3. More direct shock control/response. For the same reason many want delrin upper bushings for less squish, these completely get rid of the bushings in total.
__________________
Sam Strano Strano Performance Parts www.stranoparts.com
814-849-3450
More options than any other single company out there. More parts than any other single company I know: Brakes to Safety, Wheels to Exhaust. Suspension to Air Filters: Girodisc, Hawk, Raybestos, Essex Racing/AP, Ferodo, Wilwood, Penske, Koni, Borg Motorsport, Ridetech, Viking, After Dark Speed, Hotchkis, Bilstein, KW, Forgestar, BC Forged, Forgeline, MRR Wheels and on, and on, and on it goes.
08-28-2015, 12:52 AM
Rod-ends for Koni fronts are in stock
