Autocrossing & Roadracing Suspension Setup for Track Corvettes, Camber/Caster Adjustments, R-Compound Tires, Race Slicks, Tips on Driving Technique, Events, Results
Sponsored by:
Sponsored by:

F & R Z06 track rotors with Carbotechs

Thread Tools
 
Search this Thread
 
Old 02-08-2016, 10:03 AM
  #1  
Wickster
Racer
Thread Starter
 
Wickster's Avatar
 
Member Since: Oct 2013
Location: Spring Rebublic of Texas
Posts: 259
Likes: 0
Received 1 Like on 1 Post

Default F & R Z06 track rotors with Carbotechs

These are DBA 5000 front and DBA 4000 rear. The rears do have the parking brake drum built in. The fronts have normal minor cracking but I have new, never taken out of the wrapper rings to go with the set up. The pads are SP10 front and 2 sets of SP8 rears. The fronts are about half worn as are one set of rears. Other set of rears were bedded only and taken off the car. This is an excellent complete track day setup ready to bolt on and go. The only street miles this setup had was to and from the track.

$1000 for package











Old 02-08-2016, 10:05 AM
  #2  
Wickster
Racer
Thread Starter
 
Wickster's Avatar
 
Member Since: Oct 2013
Location: Spring Rebublic of Texas
Posts: 259
Likes: 0
Received 1 Like on 1 Post

Default

Fronts



Old 02-08-2016, 10:08 AM
  #3  
Wickster
Racer
Thread Starter
 
Wickster's Avatar
 
Member Since: Oct 2013
Location: Spring Rebublic of Texas
Posts: 259
Likes: 0
Received 1 Like on 1 Post

Default

Rears





New




Last edited by Wickster; 02-08-2016 at 10:09 AM.
Old 02-22-2016, 04:26 PM
  #4  
Suns_PSD
Le Mans Master
 
Suns_PSD's Avatar
 
Member Since: Oct 2012
Location: Texas
Posts: 8,434
Received 408 Likes on 301 Posts
Default

Are you interested in selling just the front hats and the new rotor rings? Do you have new mounting hardware to go along with it?

I don't care about used pads nor the rear rotors.

PM me please.

I'm in Austin, if that helps.
Old 02-23-2016, 07:42 AM
  #5  
Wickster
Racer
Thread Starter
 
Wickster's Avatar
 
Member Since: Oct 2013
Location: Spring Rebublic of Texas
Posts: 259
Likes: 0
Received 1 Like on 1 Post

Default

I would rather keep the rotors together.
Old 02-28-2016, 05:52 PM
  #6  
Wickster
Racer
Thread Starter
 
Wickster's Avatar
 
Member Since: Oct 2013
Location: Spring Rebublic of Texas
Posts: 259
Likes: 0
Received 1 Like on 1 Post

Default

Willing to sell the rotors as a sett and pads as sets.
Old 03-14-2016, 08:54 AM
  #7  
Wickster
Racer
Thread Starter
 
Wickster's Avatar
 
Member Since: Oct 2013
Location: Spring Rebublic of Texas
Posts: 259
Likes: 0
Received 1 Like on 1 Post

Default

The new rings are almost $700 alone. Still available.
Old 03-15-2016, 05:27 PM
  #8  
Suns_PSD
Le Mans Master
 
Suns_PSD's Avatar
 
Member Since: Oct 2012
Location: Texas
Posts: 8,434
Received 408 Likes on 301 Posts
Default

I'd be a buyer for the front rotors with the carriers.
Old 03-16-2016, 07:47 AM
  #9  
Wickster
Racer
Thread Starter
 
Wickster's Avatar
 
Member Since: Oct 2013
Location: Spring Rebublic of Texas
Posts: 259
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by Suns_PSD
I'd be a buyer for the front rotors with the carriers.
Carriers? These are stock sizes.

Rotors will be sold as package.
Old 03-30-2016, 01:41 PM
  #10  
Wickster
Racer
Thread Starter
 
Wickster's Avatar
 
Member Since: Oct 2013
Location: Spring Rebublic of Texas
Posts: 259
Likes: 0
Received 1 Like on 1 Post

Default

Still available.

Get notified of new replies

To F & R Z06 track rotors with Carbotechs




Quick Reply: F & R Z06 track rotors with Carbotechs



All times are GMT -4. The time now is 08:30 PM.