Notices
Autocrossing & Roadracing Suspension Setup for Track Corvettes, Camber/Caster Adjustments, R-Compound Tires, Race Slicks, Tips on Driving Technique, Events, Results
Sponsored by:
Sponsored by:

Hub Stand Interest

 
Old 04-08-2019, 12:11 AM
  #181  
phxcobra
CF Senior Member
 
Member Since: Jan 2010
Location: Chandler AZ
Posts: 810
Likes: 0
Received 7 Likes on 7 Posts
Default

Again, makes perfect sense. Thanks for the clarification. Figured I'd ask these questions here instead of e-mail so it may aid others as well. Hub stands look great, put them together yesterday. Haven't had a chance to put the car on them, but will be doing so in the next week or two to do an initial alignment. I'll warn others though to be careful on torque the toe bar spaces. I torque to 7 ft lbs and then went to double-check them with the torque wrench again and snapped one off. So be careful with the torque specs fellas. Excited to do my own alignments as I think the last two i've had shops do have been nothing less than horrible. Also would like to commend you on the documentation. You and AMT Motorsports have the best documentation and user manuals of any vendors I've used. It really says alot about you guys.




Pete
phxcobra is online now  
Old 04-08-2019, 10:05 AM
  #182  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 568
Received 29 Likes on 21 Posts
Default

Looks like a typo on our end, should be 4 ft-lbs. You'll have a new one by the end of the week! That's been updated in the new manual. We work to make sure we have a complete instruction manual for our products. Nothing is worse than having a great product/tool and having no instructions for it.

Colton
CSM Performance is offline  
Old 04-09-2019, 01:28 AM
  #183  
phxcobra
CF Senior Member
 
Member Since: Jan 2010
Location: Chandler AZ
Posts: 810
Likes: 0
Received 7 Likes on 7 Posts
Default

Thank you sir.
phxcobra is online now  
Old 04-09-2019, 02:06 PM
  #184  
Tool Hoarder
CF Senior Member
 
Tool Hoarder's Avatar
 
Member Since: Feb 2013
Location: Virginia Beach Virginia
Posts: 6,164
Received 1,484 Likes on 844 Posts
Default

Am I reading this right that initial pricing last year was under $1,000 and now the latest kit is around $2,000? Very very nice product and I really would like to be ably to accurately DIY alignments w/o jacking the car up down over and over.
Tool Hoarder is online now  
Old 04-09-2019, 02:30 PM
  #185  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 568
Received 29 Likes on 21 Posts
Default

Originally Posted by Tool Hoarder View Post
Am I reading this right that initial pricing last year was under $1,000 and now the latest kit is around $2,000? Very very nice product and I really would like to be ably to accurately DIY alignments w/o jacking the car up down over and over.
Thanks for the kind words and that is correct! We re-engineered our Original Precision Hub Stands to the Mk II version which improved the versatility, strength, rigidity, fit and finish. The new version requires more machine time and higher cost hardware relating to a higher price. Our Hub Stands eliminate the need to constantly jack the car up and down and settle the vehicle with every alignment change. This greatly speeds up the alignment process and improves overall accuracy. We have also engineered a Laser Alignment System to eliminate the need for strings as well.

Link:
https://csmperformance.com/product/m...on-hub-stands/
https://csmperformance.com/product/l...gnment-system/

We are running a special this week as the Pre-Orders are shipping out.

$100 off $1000 -> Code: 100off
$200 off $2000 -> Code: 200off
$300 off $3000 -> Code: 300off

Below is a comparison of our Original Hub Stands to the new Mk II Precision Hub Stands.

W/LTAS Laser Installed


W/LTAS Laser Grid Plate Installed


Shown w/Case, Caster/Camber Gauge, and LTAS

Colton @ CSM Performance LLC
CSM Performance is offline  
Old 04-12-2019, 03:44 PM
  #186  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 568
Received 29 Likes on 21 Posts
Default

All Pre-Orders have officially shipped out! Have any questions regarding our Mk II Precision Hub Stands? Feel free to reach out to us through our website, by email, or by phone!
We're nearing the end of our sale this week. Remember, all NASA member receive an additional 10% off by contacting us.

https://csmperformance.com/product/m...on-hub-stands/

Colton @ CSM Performance LLC
CSM Performance is offline  
Old 04-16-2019, 09:05 AM
  #187  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 568
Received 29 Likes on 21 Posts
Default

We recently had a customer put together an unboxing video!
CSM Performance is offline  
Old 04-22-2019, 07:43 PM
  #188  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 568
Received 29 Likes on 21 Posts
Default

Here's a photo of a customer aligning his WRX!


Get your's today @: https://csmperformance.com/home/

Thanks!
Colton
CSM Performance is offline  
Old 04-22-2019, 10:37 PM
  #189  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 568
Received 29 Likes on 21 Posts
Default

We're placing a hardware order for our Mk II Precision Hub Stands tomorrow so we're able to offer a significant discount through 3:00 PM CST tomorrow!
Our customers have been blown away by the quality, finish, and accuracy of our stands!

https://csmperformance.com/home/




Colton @ CSM Performance LLC
CSM Performance is offline  
Old 04-23-2019, 01:38 PM
  #190  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 568
Received 29 Likes on 21 Posts
Default

Last 2.5 hours to get in on this discount! This is the biggest one since the Pre-Order sale and won't happen again for a long time!











Colton @ CSM Performance LLC
CSM Performance is offline  
Old 04-27-2019, 05:50 PM
  #191  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 568
Received 29 Likes on 21 Posts
Default

Shipping out another Full Set w/LTAS and Digital Caster/Camber Gauge! If you're interested or have any questions feel free to send us a PM or give us a call!
https://csmperformance.com/home/




Thanks!
Colton @ CSM Performance LLC

Last edited by CSM Performance; 04-27-2019 at 05:51 PM.
CSM Performance is offline  
Old 05-11-2019, 11:20 AM
  #192  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 568
Received 29 Likes on 21 Posts
Default

We have a couple sets of our Original Precision Hub Stand sets left minus the Hub Mount Plates that were looking to clear from our inventory. We'll combine the Original components with the new and improved Mk II Hub Mount Plate and various other new hardware for $1199. This is a great option for those on a tight budget looking to upgrade their alignment setup! If you're interested shoot us a PM or contact us through our website @

https://csmperformance.com/home/

Original Precision Hub Stands (Shown with Laser):



Mk II Hub Mount Plate:


Thanks!

Colton @ CSM Performance LLC
CSM Performance is offline  
Old 05-15-2019, 03:39 PM
  #193  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 568
Received 29 Likes on 21 Posts
Default

One of our customers put together a series of videos Corner Balancing and Aligning his WRX with our Mk II Precision Hub Stands:


Ready to re-imagine the way your car is aligned?
https://csmperformance.com/home/

Race On!
Colton @ CSM Performance LLC
CSM Performance is offline  
Old Yesterday, 11:12 AM
  #194  
CSM Performance
Supporting Vendor
Thread Starter
 
CSM Performance's Avatar
 
Member Since: Mar 2018
Location: Carrollton Illinois (IL)
Posts: 568
Received 29 Likes on 21 Posts
Default

In celebration of the upcoming Indianapolis 500 we're offering a 15% discount until May 27th!
Coupon Code: Indy
Ready to align your car with the same tools the pros use?

Check us out at:
https://csmperformance.com/product/m...on-hub-stands/

We'd be happy to set you up with a High Quality Alignment System.
Race On!
Colton @ CSM Performance LLC
CSM Performance is offline  
 


Thread Tools
Search this Thread
Quick Reply: Hub Stand Interest


Sponsored Ads
Vendor Directory

Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: