Hub Stand Interest
The following users liked this post:
CSM Performance (05-23-2020)
#222
Pro
What's up with your website? I just want to be able to see a product for sale, and the price you are asking for it. Nothing comes up when I click on shop. Just annoying pop-up asking me to subscribe to emails I'll never read.
#224
Former Vendor
Thread Starter
#226
Former Vendor
Thread Starter
Our pre-orders are shipping Early August and we're running another production run set for Late August. With racing coming back full swing now is the perfect time for a sale.
#228
Former Vendor
Thread Starter
The above rendering shows our Five Lug Lock-A-Lug system which utilizes tapered washers inside of the slots for centering. Our standard bore size is 3.0625". If a customer would like centering rings for a hub-centric setup we can make them as you mentioned.
We generally utilize the lug-centric system for centering as the possible variations would have minimal effect on the alignment whereas a rotating wheel can suffer from vibrations due to a small misalignment. A radial misalignment would act on the effective height of the Hub Stand. If we say there is a variance of 0.010" due to bent studs, a poorly machined wheel hub, or some other issue it will have a rake angle effect of ~0.005 degrees over a 100 inch wheelbase. Rake angle is generally only measure down to 0.1 degree, two magnitudes greater.
In essence, we can definitely make a set of hub-centric rings if a customer would like but for most applications there is no need. Thanks for asking that, glad we're not the only ones who think about these things!
Thanks!
Colton @ CSM Performance LLC
#230
Is Colton still running CSM? I have one of the original sets of hub stands and went to their website to look at maybe updating to the newer version. They sure have changed a lot (look like jewelry now!) but they also are a LOT more expensive. I'm wondering if someone bought them out or something. I see the name change on the profile too.
The following users liked this post:
CMiller95 (11-09-2022)
#231
Instructor
Is Colton still running CSM? I have one of the original sets of hub stands and went to their website to look at maybe updating to the newer version. They sure have changed a lot (look like jewelry now!) but they also are a LOT more expensive. I'm wondering if someone bought them out or something. I see the name change on the profile too.
Thanks!
Colton
The following users liked this post:
Poor-sha (11-10-2022)
#232
Former Vendor
Thread Starter
Happy 4th Weekend!
We've released a number of updates over the past three years, engineering one of the premier alignment solutions on the market.
The Corvette Community's support has had an enormous impact on our success and we're incredibly grateful.
We've released a number of updates over the past three years, engineering one of the premier alignment solutions on the market.
The Corvette Community's support has had an enormous impact on our success and we're incredibly grateful.
We've recently transitioned our product line to feature Hardcoat Anodizing as the standard option.
Hardcoat creates a surface hardness equivalent to tool steel for superior wear resistance and longevity along with high contrast aesthetics.
#234
Le Mans Master
Is there a link for July 4th purchases?
The following users liked this post:
CSM Performance (07-02-2023)
#235
Former Vendor
Thread Starter
We don't have a public sale for the 4th on our website but I'd be happy to send you a custom quote with a discount for the 4th. Feel free to PM me on here or email me directly at Colton@CSMPerformance.com and we can tailor it for your needs.
#236
The full CSM hub stand setup was expensive, but I really am happy with it. It's the first alignment setup I've had where I always get the same results and never feel like I'm trying to divine the actual toe under a magnifying glass. I used it today to set the track alignment on my Blackwing.
The following users liked this post:
CSM Performance (07-05-2023)
The following users liked this post:
Poor-sha (07-28-2023)
#239
Former Vendor
Thread Starter
Released Early By Customer Request! Our Black Friday Sale goes live tomorrow thru Cyber Monday with 5% off all of our products. We only run one sale a year and this is it!
How do you take advantage of the sale?
- Reach out to us on here, Instagram, our website, or through the phone.
- We'll tailor a package specific to your needs with everything you need and nothing you don't.
Make alignments simple, repeatable, precise, and stress-free. The perfect time to setup for 2024
How do you take advantage of the sale?
- Reach out to us on here, Instagram, our website, or through the phone.
- We'll tailor a package specific to your needs with everything you need and nothing you don't.
Make alignments simple, repeatable, precise, and stress-free. The perfect time to setup for 2024