1965 Corvette - TSB #774
#1
Safety Car
Thread Starter
1965 Corvette - TSB #774
A few weeks ago I started a thread about WhiteFace Gauge Overlays ==> Click Here and since then I have had a number of people informed me that I used a 1966 temp gauge overlay.
To clear matters up: When I purchased my ’65 it had a ’66 Temp gauge installed (see below), which could be correct according to Technical Service Bulletin (TSB) #774 Dated Nov 23, 1965.
I don't know if my '65 had '66 installed per TSB 774 or PO just install a '66 temp gauge. But in either case I use '66 overlay on '66 gauge.
This matter had been brought up before but for newer members here is the TSB for review ===> Click Here
George
To clear matters up: When I purchased my ’65 it had a ’66 Temp gauge installed (see below), which could be correct according to Technical Service Bulletin (TSB) #774 Dated Nov 23, 1965.
I don't know if my '65 had '66 installed per TSB 774 or PO just install a '66 temp gauge. But in either case I use '66 overlay on '66 gauge.
This matter had been brought up before but for newer members here is the TSB for review ===> Click Here
George
#3
Race Director
Member Since: Jan 2007
Location: Down on the bayou in south Louisiana
Posts: 13,671
Likes: 0
Received 12 Likes
on
9 Posts
St. Jude Donor '10
I wish I'd never seen this thread. I'm just finishing up a several year frame off on a white 65 with silver interior. 300hp, auto, a/c, PS, PB and telescopic and those white guages may cause a little more project creep.