C1 & C2 Corvettes General C1 Corvette & C2 Corvette Discussion, Technical Info, Performance Upgrades, Project Builds, Restorations

rare casting#492 SBC double hump heads

Old 03-22-2010, 10:20 AM
  #1  
dcmock
Burning Brakes
Thread Starter
 
dcmock's Avatar
 
Member Since: Feb 2007
Location: Eagle Rock Missouri
Posts: 1,015
Likes: 0
Received 0 Likes on 0 Posts
Default rare casting#492 SBC double hump heads

I have a set of double hump 2.02 1.60 angle plug heads. The heads just got completely redone , 3 angle valve job, magnafluxed, milled , ported and are ready to install. These are pretty rare heads and were only available from GM performance over the counter. These have the accessory holes drill, comp springs, guide plates, studes, self aligning rockers. I want to sell these for 600.00 or trade for some 64cc aluminum heads or vortec heads. The only reason I am selling is cause my motor has to much compression to run pump gas 417 846 5058 or dcmock@centurytel.net

Last edited by dcmock; 03-22-2010 at 06:35 PM.
Old 03-22-2010, 10:29 AM
  #2  
larrywalk
Melting Slicks

 
larrywalk's Avatar
 
Member Since: Oct 2002
Location: St Louis MO
Posts: 2,303
Received 102 Likes on 73 Posts

Default

How far were they milled, or what is the current combustion chamber volume?

Originally, these heads were stock with ~64cc.
Old 03-22-2010, 11:40 AM
  #3  
Kerrmudgeon
Race Director
 
Kerrmudgeon's Avatar
 
Member Since: Mar 2009
Location: Canada's capital
Posts: 19,777
Received 4,583 Likes on 2,157 Posts
2020 Corvette of the Year Finalist (appearance mods)
C1 of Year Finalist (appearance mods) 2019

Default

Bought a set from GM in the 70's, paid about a grand back then! You had to buy them bare and load them up. Best heads I ever had, and....changing the plugs with full headers was a breeze with those angled plugs. No problems with ign. wires too close to the heat. $600 is very fair IMHO.
Old 03-22-2010, 11:49 AM
  #4  
robert miller
Team Owner
 
robert miller's Avatar
 
Member Since: Jan 2007
Location: cookeville tennessee
Posts: 28,846
Received 1,762 Likes on 1,529 Posts

Default

Originally Posted by kerrmudgeon
Bought a set from GM in the 70's, paid about a grand back then! You had to buy them bare and load them up. Best heads I ever had, and....changing the plugs with full headers was a breeze with those angled plugs. No problems with ign. wires too close to the heat. $600 is very fair IMHO.
very nice set of heads. But the milling will kill them for most or a lot. Would really help the 300 hp guys. Bump

Get notified of new replies

To rare casting#492 SBC double hump heads



Thread Tools
Search this Thread
Quick Reply: rare casting#492 SBC double hump heads



All times are GMT -4. The time now is 07:27 AM.