63 wheel alignment specs
#1
Melting Slicks
Thread Starter
63 wheel alignment specs
Hi Guys.Need to know the wheel alignment specs for my 63 front and rear.Tried to find them on the internet but i came up blank.Either the specs or a web site that might have them.Thanks Bob W
#2
Platinum Supporting Dealership
Hi Bob !
I bet you find them in the Heritage Center kit. You can download the 63 info here.
http://www.gmheritagecenter.com/gm-h...tion-kits.html
I bet you find them in the Heritage Center kit. You can download the 63 info here.
http://www.gmheritagecenter.com/gm-h...tion-kits.html
__________________
Tom Hendricks tom@budschevy.com
Corvette Specialist Since 1993
BUDS CHEVROLET
St. Marys, Ohio
800-688-2837
WEBSITE WWW.BUDSCHEVY.COM
HOURS MON-WED 7:00AM - 5:00PM
FFRIDAY AND SATURDAY BY APPT.
OFF THURSDAYS
NCRS # 23758 Miami Valley Chapter ( Ohio )
NCM Founding Member #1143
NADA Classic Car Guide Advisiory Board Member
C5/C6 Registry Corporate Member # 5
My Corvettes. 63, 71, 73, 78.
Tom Hendricks tom@budschevy.com
Facebook Post
Corvette Specialist Since 1993
BUDS CHEVROLET
St. Marys, Ohio
800-688-2837
WEBSITE WWW.BUDSCHEVY.COM
HOURS MON-WED 7:00AM - 5:00PM
FFRIDAY AND SATURDAY BY APPT.
OFF THURSDAYS
NCRS # 23758 Miami Valley Chapter ( Ohio )
NCM Founding Member #1143
NADA Classic Car Guide Advisiory Board Member
C5/C6 Registry Corporate Member # 5
My Corvettes. 63, 71, 73, 78.
#3
Team Owner
Member Since: Oct 2000
Location: Washington Michigan
Posts: 38,899
Received 1,856 Likes
on
1,099 Posts
Front Camber: 0*
Front Caster: 2* positive (manual steering), 3.5* (power steering)
Front Toe-In: Zero-to-1/16" TOTAL toe-in (1/32" per side) with radial tires; with bias-ply tires, 1/8"-1/4" TOTAL toe-in.
Rear Camber: Zero-to-1/2* negative.
Rear Toe-In: Same as front.
The following users liked this post:
‘63 (03-30-2022)
#4
Melting Slicks
Thread Starter
Thanks Guys.I loaned out my assembly manual and never got it back.Bob W