Good tips for those who will install Demon Carb.............
#1
Safety Car
Thread Starter
Good tips for those who will install Demon Carb.............
First Mr Gasket makes a dual feed chrome line for fuel feed for all Deamon carbs...simular to Holly chrome line, a new item that can be ordered by local auto parts store about 22 bucks.......no need for 75 buck stainless setup......also a small tang is loctated under wiper moter of mid year vettes , it is a switched source & perfect for elecric choke...you have to feel for it, IE THE TANG, to find it & its a perfect positive feed for choke....also the carb air cleaner hold down stud is one size larger than the holley 1/4 coursae the auto store has a $1.99 adapter .....To accomodate the Deamon stud... finally the secondary vacume springs are exact duplicate of Holley secondary springs....didnt relalise untill I took a good look , already had them in my parts bin now have two sets.....these tips were provded to me by other forum members & Excellant info, relaying to those pending Deamon setup....... :flag
[Modified by StrayDog, 5:34 PM 5/13/2002] :seeya :seeya :seeya :seeya :seeya
[Modified by StrayDog, 5:37 PM 5/13/2002]
[Modified by StrayDog, 5:34 PM 5/13/2002] :seeya :seeya :seeya :seeya :seeya
[Modified by StrayDog, 5:37 PM 5/13/2002]
#2
Re: Good tips for those who will install Demon Carb............. (StrayDog)
thanks for the tips.. I might be looking at a new carb for my new 66' If I go with new it will be a Demon as you guys rate them good.
Mike
Mike