Frame repair instruction for a ´59
#1
Melting Slicks
Thread Starter
Member Since: Aug 2000
Location: Sindelfingen Germany
Posts: 2,112
Likes: 0
Received 2 Likes
on
2 Posts
Frame repair instruction for a ´59
Hi guys,
I´m normally in the C5 section, but a friend of mine has a little problem. To solve this he needs a repair instruction for the chassis/frame. Does it exist anywhere? I got a frame repair instruction from GM, but only for C5´s. It is a help, but I want to be sure not to miss one specially for a C1.
Maybe someone´s got a book or something else to make a copy.
Thanks a lot
Frederik
I´m normally in the C5 section, but a friend of mine has a little problem. To solve this he needs a repair instruction for the chassis/frame. Does it exist anywhere? I got a frame repair instruction from GM, but only for C5´s. It is a help, but I want to be sure not to miss one specially for a C1.
Maybe someone´s got a book or something else to make a copy.
Thanks a lot
Frederik
#2
Team Owner
Member Since: Oct 2000
Location: Washington Michigan
Posts: 38,899
Received 1,856 Likes
on
1,099 Posts
Re: Frame repair instruction for a ´59 (C5 Frederik)
There's a dimensioned frame illustration and tramming diagram in the Frame section of the "ST-12" ('53-'62 Corvette Service Manual); I don't know of any other frame references, unless a frame shop has some really OLD manuals from their frame-straightening equipment suppliers.
[Modified by JohnZ, 1:12 PM 5/14/2002]
[Modified by JohnZ, 1:12 PM 5/14/2002]