Adjustable timing light
#1
Le Mans Master
Thread Starter
Member Since: Oct 2007
Location: Richmond Kentucky
Posts: 5,719
Received 1,240 Likes
on
457 Posts
2022 Corvette of the Year Finalist -- Modified
2021 C2 of the Year Winner - Modified
2021 C1 of the Year Winner - Modified
2020 Corvette of the Year (stock)
C2 of Year Winner (stock) 2019
2017 C1 of the Year Finalist
Adjustable timing light
Who makes the "best value" adjustable timing light?
#2
Le Mans Master
I am real happy with my Craftsman. Great price.
Mine is the old red unit with analog gauge.
Mine is the old red unit with analog gauge.
Last edited by MiguelsC2; 12-19-2012 at 03:53 PM.
#3
Team Owner
#4
Racer
Member Since: May 2006
Location: Fairfield County Connecticut
Posts: 364
Likes: 0
Received 0 Likes
on
0 Posts
I have one from Sears Hardware and am very happy with it.
http://www.sears.com/craftsman-advan...p-00914065000P
Tim
http://www.sears.com/craftsman-advan...p-00914065000P
Tim
#5
Burning Brakes
For the little bit that I use one I ended up buying one from Harbor Freight. It worked great. $24.99 right now.
http://www.harborfreight.com/timing-...nce-40963.html
http://www.harborfreight.com/timing-...nce-40963.html
#6
Racer
Snap on
I have had a Snap On Timing light for years #MT1261.
You get what ya pay for and they are readily available on craigslist, swap meets or pawn shops for $100-$200.
You get what ya pay for and they are readily available on craigslist, swap meets or pawn shops for $100-$200.
#7
Team Owner
I have two.
I put a harbor freight cheapo in the car that I can beat up and not worry about for event or roadside tweeks and I have the good one safe for Garage work (my Snap On) is a very good unit, but cost more.
#8
Safety Car
Member Since: Mar 2006
Location: Itasca IL
Posts: 3,840
Received 849 Likes
on
475 Posts
2015 C2 of Year Finalist
I picked up this about 3 years ago and think very highly of it. The screen is nicely backlit and you can simultaneously view the tach and advance readings.
http://www.sears.com/shc/s/p_10153_1...20Testersmv=rr
http://www.sears.com/shc/s/p_10153_1...20Testersmv=rr
#9
Le Mans Master
Mine is a Craftsman and has performed flawlessly.
Adjustable or dial-back timing lights are like DVRs. Once you have one you wonder how you ever survived without it.
Adjustable or dial-back timing lights are like DVRs. Once you have one you wonder how you ever survived without it.
#10
Race Director
Member Since: Nov 2000
Location: Beverly Hills (Pine Ridge) Florida
Posts: 10,152
Received 525 Likes
on
374 Posts
From a previous post of mine:
Beware that the adjustable advance lights are not necessarily accurate. I have an Actron CP7528 (Inductive pickup with the advance dial). I compared it's readings with a distributor on my Sun Machine, to check it's accuracy (firing a separate ignition coil to fire the Actron strobe/circuit).
The Actron readings showed a consistent 2 degrees of error at all positions above zero, as tested @ both 500 & 1000 dist. RPM on the Sun (1000 & 2000 crank RPM). In other words, 2 separate sets of tests.
When the Actron's advance dial was set on "0", Sun agreed "0".
Actron set on 10, Sun read 4 dist. (8 crank).
Actron set on 20, Sun read 9 dist. (18 crank).
Actron set on 30, Sun read 14 dist. (28 crank).
Actron set on 40, Sun read 19 dist. (38 crank).
Actron set on 50, Sun read 24 dist. (48 crank).
Actron set on 60, Sun read 29 dist. (58 crank).
In each case, if I added 2 degrees to the Actron setting as a correction factor, it would fire at the correct point.
Examples:
Actron set at 12 deg. would actually be 10 crank deg.
Actron set at 32 deg. would actually be 30 crank deg.
Actron set at 62 deg. would actually be 60 crank deg.
While I agree that 2 deg. of error is not a lot, it still can matter.
And your results may vary......
I also tested my other 2 timing lights at the same time (both non "advance" type). An older Craftsman Inductive pickup, and a cheap Equus Inductive pickup unit. Both fired at zero, and worked fine at all RPMs.
The Actron was the brightest, and the Equus the dimmest.
Plasticman
Beware that the adjustable advance lights are not necessarily accurate. I have an Actron CP7528 (Inductive pickup with the advance dial). I compared it's readings with a distributor on my Sun Machine, to check it's accuracy (firing a separate ignition coil to fire the Actron strobe/circuit).
The Actron readings showed a consistent 2 degrees of error at all positions above zero, as tested @ both 500 & 1000 dist. RPM on the Sun (1000 & 2000 crank RPM). In other words, 2 separate sets of tests.
When the Actron's advance dial was set on "0", Sun agreed "0".
Actron set on 10, Sun read 4 dist. (8 crank).
Actron set on 20, Sun read 9 dist. (18 crank).
Actron set on 30, Sun read 14 dist. (28 crank).
Actron set on 40, Sun read 19 dist. (38 crank).
Actron set on 50, Sun read 24 dist. (48 crank).
Actron set on 60, Sun read 29 dist. (58 crank).
In each case, if I added 2 degrees to the Actron setting as a correction factor, it would fire at the correct point.
Examples:
Actron set at 12 deg. would actually be 10 crank deg.
Actron set at 32 deg. would actually be 30 crank deg.
Actron set at 62 deg. would actually be 60 crank deg.
While I agree that 2 deg. of error is not a lot, it still can matter.
And your results may vary......
I also tested my other 2 timing lights at the same time (both non "advance" type). An older Craftsman Inductive pickup, and a cheap Equus Inductive pickup unit. Both fired at zero, and worked fine at all RPMs.
The Actron was the brightest, and the Equus the dimmest.
Plasticman