HS Vette

The car has been found, it was part of a court case where they would buy small block cars and convert them to matching numbers fully documented big block cars. Here is the thread.

https://www.corvetteforum.com/forums...77s117307.html

ricks327

Missed that thread when posted, interesting read.

midnight02

Cleaning upstairs at the shop and have a T10 transmission out of a 1963. Tail housing end is broken off which I assume is why it's been under a shelving unit.

VIN: 3105244 (Coupe 30837S105244 or Convertible 30867S105244)
Assembly: WL1422 (Warren / November 14, 1962 / 2nd Shift)
Case: T10D-1
Tail Housing: T10-7D 3813490
Tail Housing Date: 9 27 62 (September 27, 1962)

VetteZr

I'm not sure where to post this so I'll try here & hopefully one of the moderators will assist. I had bought a box of C3 parts from a friend about 35 years ago for one of my builds, while going through the box recently, a VIN plate fell out as I was tearing up the box for the trash, I tried contacting the friend who sold me the stuff & I learned that he had died, the VIN plate is for an early 63 convertible, if I can find who the owner is, I will send it to him for the cost of registered mail only, but that person must be able to prove he does in fact own this car, I welcome any inqueries or suggestions in trying to return this to its current owner. After all these years I am doubtful if the car or the owner can be found, but I am taking this opportunity to try to find the owner of this important identification piece. As a retired Deputy Sheriff officer, I am well aware of how these items are misused by car thieves, therefore I will not sell it and if after sufficient time I cannot find the legal owner of this part, it will be turned over to the state police in my state for proper disposal.
Don

carlisle61

I have the block and heads for VIN 111976. The block is stamped FO301HH and is dated B--5, and the heads are dated B-10-5 and B-8-5. Anyone know where this car may be.

Mikey Hawks

I checked and it's not listed in the C2 Registry.

vettebuyer6369

On ebay, Ill post info for when it disappears.

VIN 02047, 1963 FI engine

http://www.ebay.com/itm/1963-Corvett...70Q5PQ&vxp=mtr

vettebuyer6369

You need to post the VIN or no one will know what car it goes to.

289cobra

last 6 of vin 102657,BD 10/31/66, vo927HE, deer park, new York 631-357-2602 - price $1500

ttaillon

I am restoring a couple of C3s and my 92-year old neighbor gave me some paperwork for a few Corvettes she had over the years. I have her original bill of sale from her 1956 and 1969 Corvettes.

The C1 was black with a hard top and auto trans. Total price out the door was $4,038.85!

I will have to ask her permission, but I'm pretty sure she would love to get the paperwork to the current owner.

Eric Baldwin

I have a corvette 327 in my 57 chevy runs great the stamping on pad F0316RD and vin of 3782870. block date is C-14-64 heads are 461 castings dated C-13-64 I will pull and sell the long block if any one is interested. 570-724 -6863 ERic thanks

NOTE: I am editing this member's post, as he listed the #870 block casting number for the VIN. The actual VIN stamp is 4113953.

289cobra

1962 corvette engine 2105737, 870,FOIO4RC?,L151, found on craigslist Elmira,NY 716 485 3078 $1900

Todd H.

Many years ago my brother and I owned a project 1956 Corvette that was all in pieces. The car had been hit fairly hard in front. I sold what was a body and frame and a few boxes of parts in about 1982. I thought the VIN plate had gone with it, but my brother has informed me that he still has it. If this car is back on the road it's undoubtedly been assigned a new VIN now, but we thought we'd try to return the VIN to the car if it can be found and the frame stamp can be read.

It is for E56S003736. It's not in the C1 Registry.

racerx1

While at the local machine shop yesterday, I spotted a 427 block. According the owner of the machine shop, the prior shop owner hoarded parts and this 427 block was tucked away in a corner for years. While cleaning up the storage area, the new owner “found” the block. He cleaned it up and magnafluxed it….no cracks. The owner of the shop is interested in selling the block. I have no idea what he wants for it. The block is located at Lou’s M&B Machine Shop (formerly M&B Automotive Machine Shop) in Stamford, CT. Lou’s phone number is (203) 348-6134. Lou runs a solo shop, so you may have to call a few times before he will pick up.

Note: the VIN derivative on the pad appears to be 6126484.

ricks327

On Ebay is the small block engine for 67 Corvette, VIN: 21173.

http://www.ebay.com/itm/1967-Corvett...9XDbDg&vxp=mtr

289cobra

vin 6108055, jan. build date, FI ___HT ? engine code, phone 502 609 2236.

reddog5

My brother has 64 engine bare block with crank. Located in Ontario, Canada

Stamp pad: 4118434 F0428RD
Casting:3782870
Date: D254 (April 25, 1964)

Would like to match with original car if possible.

289cobra

On craigslist Hudson Valley, NY. no phone number. date I35, vin 6102364, T0930IL. Today's date 7/12/16

289cobra

craigslist 937-403-3356 vin 4106011 FII23RD

actionguru

I have 1964 FI engine #4103393

dave@littleredcorvette.org