When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I sold my 65 a few years ago and now bought a 64. Missed the car and wish I had kept it. But found this and it is a nice driver that I will put side exhaust on it and that is about it. Going to be a long few weeks until it is shipped but here in AZ it is the perfect time to have a vert.
Really nice I knew when I sold mine it was too early ,I ended up with a better car in the long run .Nice looking enjoy now you have something to keep you busy.
If that tach is to be believed, you should have 2.5 inch exhaust manifolds. To be certain, check the exhaust manifold casting numbers or at a minimum, take a close up of them when you finally get the Vette.
Mike T - Prescott AZ
A dealer in Missouri, I have been looking for one a year ago but found a 67 Camaro RS/SS350 that I could not pass on but continued to look. They have had a few dozen on Ebay and on their website over the last 10 months and they all looked good and the feedback was excellent. The car is a driver and that is what I want, was silver but repainted and has a 66 327 motor, one owner for the last 20 plus years, bonding strips all there, all electrics work including the clock, new seat covers and a nice clean frame and birdcage.
If that tach is to be believed, you should have 2.5 inch exhaust manifolds. To be certain, check the exhaust manifold casting numbers or at a minimum, take a close up of them when you finally get the Vette.
Mike T - Prescott AZ
Thanks Mike for the info but it has a NOM from a 67 car, casting number 3892657. So I will have to wait to get the car to make sure.
St. Jude Donor '14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
Great looking ride, if I do say so myself (I've got a 64 red coupe w/black interior, and the same high red line tach you've got). See my avatar. Enjoy!
12-10-2015, 12:45 PM
Well I am back.
